Kat Industrial Consultants Private Limited
Kat Industrial Consultants Private Limited
Barakhamba, New Delhi, Delhi
GST No. 07AAACK0094K2ZI
TrustSEAL Verified
Call 08048076003 83% Response Rate
SEND EMAIL
 

industrial project report

Leading Service Provider of canning of rasgulla in metal cans project report consultancy, private university project report consultancy, calcium carbonate project report consultancy, aluminium fabrication project report consultancy, women polytechnic college project report consultancy and walnut processing plant project report consultancy from New Delhi.

Canning of Rasgulla In Metal Cans Project Report Consultancy

Canning of Rasgulla In Metal Cans Project Report Consultancy
  • Canning of Rasgulla In Metal Cans Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Service LocationPan India
Service ModeOffline
Service Duration1-2 Week
Service TypeCanning of Rasgulla In Metal Cans Project Report Consultancy

We are providing the Canning of Rasgulla In Metal Cans Project Report Consultancy to our clinet as per the requirement.
Request
Callback
Yes! I am Interested

Private University Project Report Consultancy

Private University Project Report Consultancy
  • Private University Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant CapacityPrivate University
Plant & MachineryRs. 13.66 Lacs
Total Capital InvestmentRs.7.45 Cr
Rate of Return31%

Generally, under the laws of India, education is one of the charitable objects and hence it can only be conducted by a society or a trust or a section 25c company only. Reference may kindly be drawn to UGC regulations of 2003 which permits all these three types of entities to establish a Private University. Similar provisions are also found in the relevant guidelines of other state. However, a perusal of proposed UGC regulation of 2010 suggests that UGC has omitted sec 25c companies from the list of sponsoring body. Hence, it will be difficult to allow sec 25c companies in the sponsoring body for a Private University. The sponsoring body should be a registered society or registered trust. The sponsoring body registered outside of the State may also be allowed to establish a Private University in the State.
Request
Callback
Yes! I am Interested

Calcium Carbonate Project Report Consultancy

Calcium Carbonate Project Report Consultancy
  • Calcium Carbonate Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity15 MT./Day
Plant & MachineryRs. 2.47 Cr.
Total Capital InvestmentRs. 9.92 Cr.
Rate of Return28%

The commercial grade of calcium carbonate in manufactured in two forms. * Precipitated Calcium Carbonate, * Activated Calcium Carbonate, These  two forms of calcium carbonate differ in respect of coating which the former does not have and later has.  Both the forms of calcium carbonate are being used in various  industries as filler or extender,  thus assumes crucial  importance in chemical  and allied  industries. PVC Rubber, denitrified, cigarette paper,  printing ink, pharmaceutical are some  of  the calcium carbonate using industries. In this offer we have considered the product mix of Precipitated Grade which could cover very wide range of grades in terms  of  Particle  Size, Shape and  Distribution.  It  will  be possible to vary any of the three physical properties along with other physical  properties, such as Bulk Density, Flow Point, Viscosity, as required by individual customers as per their need. We have also considered 40 Tons per day capacity Activated calcium  carbonate with different coating arrangement as well as sophisticated Pressure Filtration and Drying System to ensure the quality product.
Request
Callback
Yes! I am Interested

Aluminium Fabrication Project Report Consultancy

Aluminium Fabrication Project Report Consultancy
  • Aluminium Fabrication Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity120.00 sq.mt./day
Plant & MachineryRs. 97. 50 Lacs
Total Capital InvestmentRs. 6.81 Cr
Rate of Return21%

Windows and doors connect the interior of a house to the outdoors, provide ventilation and daylight, and are important aesthetic elements. Windows and doors are often the architectural focal point of residential designs, yet they provide the lowest insulating value in the building envelope. Although the efficiency of windows has improved markedly, they still represent one of the major energy liabilities in new construction

Aluminum is now widely use as the first choice for the construction of Aluminum Doors & Windows, Ventilators and Front Wall Glazing at all major construction sites such as Hotels, Offices, Complexes, Auditoriums, Hospitals, Show rooms etc. Aluminum Ladders are widely use for domestic as well as in industrial purposes and is also used for various outdoor services  such as  street  light,  multistoried buildings,  industrial sheds,  loco sheds  and auditorium’s  maintenance

Aluminum fabricated items like doors, windows etc. have become that standard accepted feature in most modern buildings, The use of aluminum in business and office complexes , buildings, theatres ,auditorium is very extensive for functional as well as decorative purposes. Similarly in residential buildings also aluminum doors, windows, railings, grill works etc. are used extensively. Textile shops and other trading shops in lighter materials too are going in for shelves made of aluminum for tacking purposes.
Request
Callback
Yes! I am Interested

Women Polytechnic College Project Report Consultancy

Women Polytechnic College Project Report Consultancy
  • Women Polytechnic College Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 9.03 Cr.
W.C. for 3 MonthsRs. 1.16 Cr.
Total Capital InvestmentRs. 23.78 Cr.
Rate of Return25%

There is need of Women Polytechnic College in India for the development of country and provide the better opportunity for women in technical field. But in our country reservation system will not cater the merit of the general student as well as not application of technology by developed technology. Now a days highering of technology and running of administration is the main tool of the Indian’s industry. The economic progress of a country is strongly linked with the quality of education. It is therefore necessary for our technical educators to undertake periodic review of the curriculum and subject content of the technical programmes to ensure that they are up to date, not outmoded or obsolete and effectively fulfill the technological requirements of the country.
Request
Callback
Yes! I am Interested

Walnut Processing Plant Project Report Consultancy

Walnut Processing Plant Project Report Consultancy
  • Walnut Processing Plant Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Minimum Order Quantity1 Each Project Report
Plant & MachineryRs. 2.62 Cr
Total Capital InvestmentRs. 26.32 Cr
Rate of Return45%
Plant Capacity15.00 Tons/day

Georgia is considered one of the primary centers of the origin of walnut. There are great prospects for its development. Walnut is characterized with high productivity in mountain areas of East and west Georgia on the elevation of 500-900 m from see level, as well as in high area of Ratcha-Lechkhumi and East Caucasus pre-mountain areas. Despite the significantly suitable natural and soil conditions for walnut growing in Georgia, demand on local market is more 4-8 thousand tons than the in-shell walnut production.

That is why an amount of walnut is imported from other countries in high market prices. Therefore study and testing of the local germplasm, selection of high productive varieties and their extension in farms have great importance for filling this deficit. This article describes the materials of walnut germplasm study for Georgia. Prospective varieties and advanced selections are distinguished to each ecological zones of Georgia.

In recent years, the production of nuts has become one of the leading crops in Georgia. Statistics show that nut plantations in Georgia occupy 42.1% of the arable land and continue to grow in all areas of the country.
Request
Callback
Yes! I am Interested

Integrated Plant Project Report Consultancy

Integrated Plant Project Report Consultancy
  • Integrated Plant Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 2.28 Lacs
Total Capital InvestmentRs. 54.42 Lacs
Rate of Return124%
Plant Capacity4666.00 Units/day

The Integrated Unit of Air Conditioners, LED TV, Refrigerators and Washing Machines is being setup at Neemrana. There is tremendous demand in India as well as export demand. The said project will generate huge number of employment in this region.

An air conditioner is a machine which keeps the air in a building cool and dry. The purpose of an air conditioner is to maintain a comfortable indoor environment. The comfort we are used is to determined by a combination of 3 factors.

  • Temperature
  • Humidity
  • Air Distribution
Request
Callback
Yes! I am Interested

Ca Cold Storage Project Report Consultancy

Ca Cold Storage Project Report Consultancy
  • Ca Cold Storage Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity10,000 MT
Plant & MachineryRs. 10.00 Cr
Total Capital InvestmentRs. 12.70 Cr
Rate of Return16%

Cold storage industry is a very important and essential industry. In  India,  fruits and  vegetables  are  produced  in plenty.  A large number of fruits and vegetables are exported to other countries and even in India itself fruits and vegetables are transported from one place to another. This  transportation business takes some time.  So, it is desirable that fruits should be kept at a place where they can remain safe, other wise a  lot of its will be wasted.  For this purpose, Cold Storage is used.
    
Cold  Storage is a special kind of room the  temperature  of which   is  kept  very  cold  with  the  help  of  machines   and instruments.  The temperature is maintained low with the help of precision instruments.  In deciding the scale of a cold  storage plant,  all the external condition locational conditions  stored, object  etc. must be considered.  When the scale  of  plant  is larger  however  running  costs  would  generally  be  less   and automation would become more exact.
Request
Callback
Yes! I am Interested

Fish Processing Project Report Consultancy

Fish Processing Project Report Consultancy
  • Fish Processing Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity15.00 Ton/Day
Plant & MachineryRs 3.33 Cr
Total Capital InvestmentRs.27.58 Cr
Rate of Return61%

Fisheries are one of the most significant renewable resources that Indian Ocean (IO) countries have for food security, livelihoods and economic growth. Efforts however, need to be made to ensure that as the population in these countries grows, and demand for food and employment likewise grows, the
benefits that fishery resources provide, are protected through sustainable management and value-addition.

Fish Processing is a fairly wide field, covering a large number of processing technique, fish species and fish products source 20500 species of fish thus are found in tropical waters, One of the major differences between temperature and tropical fisheries is that the temperature fisheries tend to be bated on single
species setae as cod and harrying while in many tropical fisheries the catch may include 30 or more species, all of which can be consumed fresh or in processed force some of the important factors which affect the suitability of a fish for a particular process are :
Request
Callback
Yes! I am Interested

Automatic Besan Mill Project Report Consultancy

Automatic Besan Mill Project Report Consultancy
  • Automatic Besan Mill Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 27.29 Lacs
Total Capital InvestmentRs. 3.46 Cr
Rate of Return24%
Plant Capacity8.00 Ton/day

The besan is suitable for the preparation of Sev, boondi and similar products.Fried foods are enjoyed for their special taste and textural qualities. Several cereal and legume based products are well known and among them chickpea or Bengal gram is consumed to a larger extent as several types fried snacks.

"Besan" is the choice base for several traditional deep-fried sweet and savory products. The traditional producers of these products recognize that some of these products need a particular type of flour, and hence look for specific types of besan for the preparation of different products, though this is generally not available. Generally besan is prepared by grinding Bengal gram dhal in commercial units like plate mill, burr type stone mill or hammer mill (by adjusting the machine parameters like speed and clearance between grinding plates). Sev is a dough-based product prepared after addition of other ingredients like salt, turmeric powder, jeera powder, chili powder etc. to the flour & preparation of the dough of the appropriate consistency. Dough is extruded through a die (generally 1-2 mm dia) directly into the heated oil and deep fat fried till an yellowish-brown coloured crunchy product is obtained. Boondi is made from Chickpea / Bengal gram flour as globules by passing a batter of thick consistency through a perforated ladle "boondi jhara" and deep fat frying in oil.
Request
Callback
Yes! I am Interested

Toughened Glass Plant Project Report Consultancy

Toughened Glass Plant Project Report Consultancy
  • Toughened Glass Plant Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 1.20 Cr
Total Capital InvestmentRs. 2.61 Cr
Rate of Return46%
Plant Capacity1500.00 Sq.ft/day

Toughened or tempered glass is a type of safety glass processed by controlled thermal or chemical treatments to increase its strength compared with normal glass. Tempering puts the outer surfaces into compression and the inner surfaces into tension. Such stresses cause the glass, when broken, to crumble into small granular chunks instead of splintering into jagged shards as plate glass (a.k.a. annealed glass) creates. The granular chunks are less likely to cause injury.

Toughened glass, as the name itself suggests, is glass material is tougher than ordinary glass that has low resistance power. These are stronger varieties that are used in various places, whether residential or commercial constructions. In fact, the strength of the toughened glass is up to five times more than that of annealed glasses. Toughened glass is also used to manufacture glassware and these products are comparatively safer and offer more durability. However, the strength of these items should not be confused with any wrong perception of being unbreakable. If products made of toughened glass are handled with proper care, they can last even for a lifetime.
Request
Callback
Yes! I am Interested

Candles Manufacturing Project Report Consultancy

Candles Manufacturing Project Report Consultancy
  • Candles Manufacturing Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity6000.00 Packets/day
Plant & MachineryRs. 12.00 Lacs
Total Capital InvestmentRs. 2.45 Cr
Rate of Return18%

The  candle  making  has  been  practiced  and  despite  the introduction of mass production methods, candles can still be made by  well-established methods  which require only simple equipment. Much of this equipment can be made by rural craft men.

A candle is simply a solid cylinder of tallow, wax or other solid fat, containing a wick to give off light when burning. When the wick is lit, the flame radiates sufficient heat to melt a small pool of wax at the top of the candle. The liquid wax is then drawn up the wick by capillary action into the flame where it is vaporized and burnt. The size of the flame is important and should be related to the diameter of the candle.
Request
Callback
Yes! I am Interested

Isobgol Processing Unit Project Report Consultancy

Isobgol Processing Unit Project Report Consultancy
  • Isobgol Processing Unit Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity1.00 MT/day
Plant & MachineryRs 14.75 Lacs
Total Capital InvestmentRs 1.16 Cr
Rate of Return56%

Isobgol (psyllium) is a natural gift to India especially  to the North Gujarat and the southern part of Rajasthan since in  no other  part  of the world the climatic conditions are  such  that which are favourable for growing Isobgol crop.

Isobgol  is  a Persian name  which means  horse's  ear.(Isob means  horse  any  gol means ear) The name  completely  suits  the description of isobgol seed, as it is very much resembles horse's ear.  The Isobgol seed has Two parts, the above thin white layer known as isobgol 'hush' or'sat' isobgol' and the inner red known as gola.
Request
Callback
Yes! I am Interested

Dal Mill Project Report Consultancy

Dal Mill Project Report Consultancy
  • Dal Mill Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Rated Capacity15.00 Tons/ day
Plant & MachineryRs. 18.47 Lacs
Total Capital investmentRs. 191.00 Lacs
Rate of Return53.39 %

Dal (Pulses) is a day cereal which is taken to fulfill the requirements of protein for a normal human being. Pulses are important food item extremely consumed by people all over the world.
Request
Callback
Yes! I am Interested

EPDM Rubber Profiles Project Report Consultancy

EPDM Rubber Profiles Project Report Consultancy
  • EPDM Rubber Profiles Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Cpacity3.00 MT/Day
Plant & MachineryRs. 2.00 Cr
Total Capital InvestmentRs. 8.60 Cr
Rate of Return36%

Ethylene Propylene Diene Monomer Rubber, also named as EPDM in short, is the polymer of ethylene and propylene. Large scale commercial production began in 1963 and the current overall global consumption of EFPM are 800,000 tons per year. EPDM is polyolefine - categorized and has excellent performance of vulcanization and its gravity is the lowest among all rubbers.

These are radon copolymers of the two hydrocarbons ethylene and propylene with the ethylene varying from 40 to 70% by weight. This produces a saturated rubber, EPM, which has to be vulcanized with peroxide systems. Small quantities of a third monomer are, therefore added to produce ethylene-propylene terpolymers (EPDM) which can be vulcanized with sulphur in the usual way. Both types have outstanding resistance to sunlight, ozone and all forms of aging and weathering; together with a capacity to accept large loadings of extender oil and fillers without undue loss of physical properties. So far, their use in tyres has been limited mainly due to processing difficulties, although blends with up to 20% of EPDM have been successfully adopted by some manufacturers, particularly for sidewalls. Recent developments indicate more extensive use of EPDM in tyres. Non-tyre applications for EPDM include automobile components, roller coverings, acid hose, general building applications, reservoir linings and roofing sheet. Another important application for EPM and EPDM is in electric cable insulation.
Request
Callback
Yes! I am Interested

Galvanised Wire Project Report Consultancy

Galvanised Wire Project Report Consultancy
  • Galvanised Wire Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity4.00 MT/DAY
Plant & MachineryRs.1.22 Cr
Total Capital InvestmentRs. 4.19 Cr
Rate of Return39%

Mild Steel Galvanized steel wire popularly known as galvanized wire have extensive application in various field. It has got excellent demand in prestressed concrete product like railway sleeper, telegraph and telephone, electric pole etc. and also find ample application in pre-casted cement product like pipes, frames of door and windows etc. On the other hand it has its own market in the field of strands and also its domestic demand can not be ignored. The M.S. Wire are drawn to required dia and then galvanized i.e. coating of zinc is employed on it, gives excellent anticorrosion property to steel wire.
Request
Callback
Yes! I am Interested

Flour Mill Project Report Consultancy

Flour Mill Project Report Consultancy
  • Flour Mill Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity25.00 MT/day
Plant & MachineryRs. 71.53 Lacs
Total Capital InvestmentRs. 6.45 Cr
Rate of Return25%

Flour mill serve the purpose of processing wheat to convert it into flour. Wheat grains are the seeds of the wheat plant which is able to grow is kinds of soil and under widely differing climatic conditions. The principle wheat’s of commerce belong to the botanical groups Triticum vulgane, Triticum drum and triticum compactum. A grain of wheat is avoid in shape and it  bears  at one end a number of short fine Grains.

The grains of wheat consists of  three main parts the enveloping skins, the embryo and the endosperm. The relative proportions of these parts vary with the plumpness of the grain but the average composition of wheat is 83% endosperm,  2.5% embryo and 14.5% enveloping skins.
Request
Callback
Yes! I am Interested

GI Wire and MS Binding Wire Project Report Consultancy

GI Wire and MS Binding Wire Project Report Consultancy
  • GI Wire and MS Binding Wire Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

lant Capacity80.00 MT/day
Plant & MachineryRs 3.36 Cr
Total Capital InvestmentRs 30.59 Cr
Rate of Return86%

Mild Steel Galvanized steel wire popularly known as galvanized wire have extensive application in various field. It has got excellent demand in pre-stressed concrete product like railway sleeper, telegraph and telephone, electric pole etc.and also find ample application in pre-casted cement product like pipes, frames of door and windows etc. On the other hand it has its own market in the field of strands and also its domestic demand cannot be ignored. The M.S. Wire are drawn to required dia and then galvanized i.e. coating of zinc is employed on it, gives excellent anti corrosion property to steel wire.
Request
Callback
Yes! I am Interested

Steel Plant Based On Induction Furnace For The Production Of Ingots Project Report Consultancy

Steel Plant Based On Induction Furnace For The Production Of Ingots Project Report Consultancy
  • Steel Plant Based On Induction Furnace For The Production Of Ingots Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity60.00 MT/day
Plant & MachineryRs. 1.53 Cr
Total Capital InvestmentRs. 17.61 Cr
Rate of Return60%

Castings   of  suitable  shape  and  size  intended  for subsequent hot working are termed as Ingots. Ingot  iron  has  very low carbon  in  steel.   This  is generally made in the open hearth in which all the other elements are  removed  to  the  maximum  extent  possible.   Some  of  the commercial products falling under this group have less than  0.1% of all non-iron elements put together.

Ingots are cast in ingot moulds which are the containers usually  made  of cast iron into which molten steel is  poured  & allowed to solidify.

Mild  steel  ingots are carbon steels  only  containing, usually,  0.15 to 0.25% of carbon.  These may be fully deoxidized to  reduce  the oxygen content of the steel to a minimum  inorder that  no  reaction takes places between carbon  &  oxygen  during solidification.  Such steels are called "Killed Steel". Most  of the bars and structurals are mfd.  in  standard sections/sizes.
Request
Callback
Yes! I am Interested

PV Panels Manufacturing Plant Project Report Consultancy

PV Panels Manufacturing Plant Project Report Consultancy
  • PV Panels Manufacturing Plant Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 2.63 Cr.
Total Capital InvestmentRs. 15.94 Cr
Rate of Return90%
Plant Capacity84.00 Kw/day

Solar Panels are in general Silicon made Rectangular Shaped Glass Covered Products which Produce Electricity when exposed to the Sun. These Panels produce Direct Current (DC) Electricity which has to be converted by a  Solar Inverter to Alternating Current (AC) Electricity to be used by Consumers Solar PV  panel refers to a panel designed to absorb the sun's rays as a source of energy for generating electricity.

A photovoltaic (in short PV) module is a packaged, connect assembly of typically 6×10 solar cells. Solar Photovoltaic panels constitute the solar array of a photovoltaic system that generates and supplies solar electricity in commercial and residential applications. Each module is rated by its DC output power under standard test conditions, and typically ranges from 100 to 365 watts A single solar module can produce only a limited amount of power; most installations contain multiple modules. A photovoltaic system typically includes a panel or an array of solar modules, a solar inverter, and sometimes a battery and/or solar tracker and interconnection wiring.
Request
Callback
Yes! I am Interested

Hard Board from Rice Husk Project Report Consultancy

Hard Board from Rice Husk Project Report Consultancy
  • Hard Board from Rice Husk Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant & MachineryRs. 75.10 Cr
Total Capital InvestmentRs. 123.57 Cr
Rate of Return20%
Plant Capacity200.00 MT./day

One practice, started in the seventeenth century, to separate the rice from hulls, it to put the whole rice into a pan and throw it into the air while the wind blows. The hulls are blown away while the rice fell back into the pan. This happens because the hull isn't nearly as dense as the rice. These steps are known as winnowing. Later pestles and a simple machine called a rice pounder were developed to remove hulls. In 1885 the modern rice hulling machine was invented in Brazil. During the milling processes, the hulls are removed from the raw grain to reveal whole brown rice, which may then sometimes be milled further to remove the bran layer, resulting in white rice. Rice husk is a by-product of the rice milling industry. It is a unique crop residue with uniform size and high content of ash (14–25%). The silica content of the rice husk ash (RHA) can be as high as 90–98% . This husk can be used as a fertilizer in agriculture or as an additive for cement and concrete fabrication. Due to its high silicon content, rice husk has become a source for preparation of elementary silicon and a number of silicon compounds especially silica silicon carbide and silicon nitride . India is a major producer of rice and finding ways to put the husk to use is imminent. The high silica content in the rice husk ash has attracted interest in discovering ways to use it commercially. Although silica occurs as a component of cells or cell walls in virtually all arial parts of the rice plant, it is most abundant in the husk. Owing to their small diameter, many technological applications, such as thermal insulators, composite fillers, etc., use ultrafine silica powders .We have investigated the possibility of producing high purity silicon from rice husk by purifying the rice husk silica followed by pelletizing and reduction in a modified electric arc furnace. The pelletizing was carried using carbon black as a reductant and sucrose as a binder.
Request
Callback
Yes! I am Interested

Disposable Syringes And Needle Plant Project Report Consultancy

Disposable Syringes And Needle Plant Project Report Consultancy
  • Disposable Syringes And Needle Plant Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant CapacityDisposable Syringe And Needle Plant
Plant & MachineryRs. 12.00 Cr.
Total Capital InvestmentRs. 48.83 Cr.
Rate of Return35

A syringe is a simple pump consisting of a plunger that fits tightly in a tube. The plunger can be pulled and pushed along inside a cylindrical tube (called a barrel), allowing the syringe to take in and expel a liquid or gas through an orifice at the open end of the tube. The open end of the syringe may be fitted with a hypodermic needle, a nozzle, or tubing to help direct the flow into and out of the barrel. Syringes are often used to administer injections, insert intravenous drugs into the bloodstream, apply compounds such as glue or lubricant, and measure liquids.

Medical syringes are sometimes used without a needle for orally administering liquid medicines to young children or animals, or milk to small young animals, because the dose can be measured accurately and it is easier to squirt the medicine into the subject's mouth instead of coaxing the subject to drink out of a measuring spoon.
Request
Callback
Yes! I am Interested

Offset Printing Unit (5 Colors) Project Report Consultancy

Offset Printing Unit (5 Colors) Project Report Consultancy
  • Offset Printing Unit (5 Colors) Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity1200 MT/Annum Duplex Board 900 MT/An
Plant & MachineryRs. 3.70 Cr.
Total Capital InvestmentRs. 13.12 Cr.
Rate of Return43%

In the modern era the packaging and printing industries  are playing  a  vital role for display and advertisement  of  various commodities  for  customer appeal and acceptance in  all  over world for marketing of various products. Today  several  advertising media, viz.  Radio,  Television, display  in news  paper, magazine, and exhibition in trade  fairs and distribution of pamphlets, folders, dangler to the consumers  are the prime ways to reach to the consumers for easy  acceptance of various domestic as well as industrial goods. We  are  proposing  to  manufacture  mono  cartons,  folder, dangler,  inlay  cards  etc. of various  sizes  for  our  various customers.
Request
Callback
Yes! I am Interested

Flex Banner Used In Digital Printing Project Report Consultancy

Flex Banner Used In Digital Printing Project Report Consultancy
  • Flex Banner Used In Digital Printing Project Report Consultancy
Get Best Quote
Approx. Price: Rs 6,900 / Each Project ReportGet Latest Price

Service Details:

Plant Capacity2400 SQ.FT./Day
Plant & MachineryRs. 9 Lacs
Total Capital InvestmentRs. 1.47 Lacs
Rate of Return110%

Flex Banner is often better, especially when you have something to shout about. When you've got a special promotion or just want to give your business or event that extra push, Flex banners are a great way of shouting your name from the rooftops, and needn't cost a fortune. Our no-fuss digitally printed Flex banners are waterproof, UV resistant and available with a variety of finishing options. Flex banners have become the standard for cost-effective, high-impact outdoor advertising. Flex is the most versatile and easy to use material we print. Thanks to it's dense surface the print quality is unparalleled; ideal for photographic type images. Flex also ensures excellent flat ink coverage for blocks of colour. The lightly textured surface gives a professional sheen whilst minimising glare from lights. Our Flex banners and backdrops are equally at home with indoor and outdoor use, and are tough enough to withstand heavy use with no cracking, fading or splitting.
Request
Callback
Yes! I am Interested
X

Explore More Service



Reach Us
Shubham Gupta (Director)
Kat Industrial Consultants Private Limited
38, G. F., World Trade Centre, Barakhamba Lane, Babar Lane, Barakhamba Road, Connaught Place
New Delhi - 110001, Delhi, India


Call Us


Send E-mailSend SMS