Kat Industrial Consultants Pvt Ltd

We are an ISO 9001 : 2000 certified firm engaged in providing efficient CAuto Ancilliaries Industries Project Reports to the clients. 
Auto Ancilliaries Industries Project Reports are provided by our professionals after analyzing the exact requirements of the clients. The services we offer are highly acclaimed for their effectiveness, reliability and timely execution. 
We are backed by a team of dedicated professionals, who strive hard to provide efficient and effective services. They also facilitate the smooth and streamlined execution of all the business operations. Furthermore, we lay emphasis on executing error free services and that too within the promised time frame. 

Petrol pump is small initiator of petrol industry or authorized agent of petrol to supply of petroleum product to the general people those are used L.C.V. and H.C.V. In petrol pump there is also repairing and maintenance work is going on.  Petrol pump is the procedure of agency from Indian oil corporation Ltd., or Bharat Petroleum refinery limited or any other refinery agency.

Oil has been struck in yet another structure in the Mumbai high offshore area. The discovery was made on August 23 on the structure R-10, 15 kms south of the Ratna Oil field. The well on the structure flowed at the rate of 2,227 bpd of oil and 22,120 cumpd of gas.

A fuel filter is a filter in the fuel line that screens out dirt and rust particles from the fuel, normally made into cartridges containing a filter paper. They are found in most internal combustion engines.

Fuel filters serve a vital function in today's modern, tight-tolerance engine fuel systems. Unfiltered fuel may contain several kinds of contamination, for example paint chips and dirt that has been knocked into the tank while filling, or rust caused by moisture in a steel tank. If these substances are not removed before the fuel enters the system, they will cause rapid wear and failure of the fuel pump and injectors, due to the abrasive action of the particles on the high-precision components used in modern injection systems. Fuel filters also improve performance, as the fewer contaminants present in the fuel, the more efficiently it can be burnt.

We are an ISO 9001 : 2000 certified firm engaged in providing efficient Metallurgical Industries Project to the clients. 

Metallurgical Industries Project is provided by our professionals after analyzing the exact requirements of the clients. The services we offer are highly acclaimed for their effectiveness, reliability and timely execution. 
We are backed by a team of dedicated professionals, who strive hard to provide efficient and effective services. They also facilitate the smooth and streamlined execution of all the business operations. Furthermore, we lay emphasis on executing error free services and that too within the promised time frame.

The inlet valve is used to allow the income charge into the engine during the suction stroke. Exhaust valve used to allow the exhaust gases out of the engine during exhaust stroke. Both the valves close the combustion chamber during the rest of the cycles.  The valve movement is constrained by a valve guide. The seat inserts provide the seating surface for the valves to seal the combustion chamber. The opening and closing of the valves are controlled according to the valve timing by the camshaft, which gets drive from the crankshaft.

The valve train components and the mechanical load for the inlet and exhaust valves remains similar whereas the operating environment of both the valves differ which make the design considerations different for inlet and exhaust valves. The inlet valve is always cooled by the incoming charge in the inlet port so it operates at a lesser temperature. The exhaust valve is always surrounded by the hot gases and hence operates at a high temperature. The design department considers the above functional requirements during the design of valves.

The valves are manufactured through forging, Heat treatment and machining route. High precision dimensions like stem diameter, Seat height and seat Runout are maintained through the grinding process.

Lubricating oils are the agents, solids, semisolids or  liquids  employed for reducing friction and  preventing  wear  between  machine parts in relative motion, it acts also as  as  a medium  to conduct away the heat of friction and as  carrier  for  contamination  products which are later removed from the  system,   it  may also serve other purposes, such as corrosion  prevention, electrical insulation, and sealing to prevent loss of pressure or  against entry of dirt.

Oils used in intermittent service must show  the  best possible  change  in viscosity with temperatures that  is  thin viscosity  must  be high. These oils are  changed at  relatively  frequent  intervals  to remove the dirt and foreign  matter  they  collected  in service, The stability of such oils is,  therefore, of  less  importance  than  in the  stability  of  oils  used  in  continuous service for long periods without renewal .

Battery-run rickshaws could be a low-emitter complementary transport for the low-income people, who suffer most from a lack of transport facility, if introduced in a systematic manner according to experts.

Electric rickshaws are most popular in Asia. The low cost Chinese version being the first to show up on streets. They are mostly used in China, India, Bangladesh and Nepal, also in low numbers other parts of Asia they have been showing up. China, Japan, India, and European countries (Switzerland, France, Germany) have researched and developed electric tricycles for commercial transport and are attempting to capture the growing market in Asia. Government has made efforts though to run them and made plans to issue licences on a fee of 1.5tk but there has been no action on this matter to date.

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooling purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. To ascertain the quality, safety and performance certain regulations are applicable such as BIS standardization and Explosive License etc. While all the cylinders are spray-painted with a signal red colour. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinder the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/ Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing.

Nuts and Bolts are most commonly used items in the family of industrial fasteners and their demand is fast increasing due to expansion of industries in the country. Bolt is a piece of metal rod whose one end is upset and at the other end threading is done. Nut is a device which rolls on bolt threads. In nuts, internal threading is done while bolts bear external thread.

Screw, demonstrate their true merit in the movements, assembly etc, of wooden components. Screws are most popular as fasteners which assemble, or join parts together to be made into a complete unit.

A  limited  nos.  of  manufacturers  of  various  types   of automobile  vehicles  in India  had their limited  capacities  of production. Models  designs were changed rarely.  Hence  these  vehicles either  could  does not attract or could not reach  the  aspiring purchasers.   A  revolution has come in the  automobile  industry with the introduction of light vehicles manufactured.

We are an ISO 9001 : 2000 certified firm engaged in providing efficient Cycle Industry Project Report to the clients. 

Cycle Industry Project Report is provided by our professionals after analyzing the exact requirements of the clients. The services we offer are highly acclaimed for their effectiveness, reliability and timely execution. 
We are backed by a team of dedicated professionals, who strive hard to provide efficient and effective services. They also facilitate the smooth and streamlined execution of all the business operations. Furthermore, we lay emphasis on executing error free services and that too within the promised time frame.