Kat Industrial Consultants Pvt Ltd
Kat Industrial Consultants Pvt Ltd
Barakhamba Road, New Delhi, Delhi
GST No. 07AAACK0094K2ZI
TrustSEAL Verified
Call 0804897092380% Response Rate
SEND EMAIL
 

New Items

Electric Vehicle Conversion Kit Project Report

Electric Vehicle Conversion Kit Project Report
  • Electric Vehicle Conversion Kit Project Report
  • Electric Vehicle Conversion Kit Project Report
  • Electric Vehicle Conversion Kit Project Report
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeonline
service duration1 day
service locationPan India
bussiness / industryElectric Vehicle Conversion Kit Project Report
Service TypeIndustrial

What is Retrofication

 

In automobile engineering, Retrofication is the replacement of a car's combustion engine and connected components with an electric motor and batteries, to create an all-electric vehicle.

 

How it Works?

 

 

  • 1. Upload the details of ICE vehicle to be converted into EV
  • 2. Upon uploading, the details of your enquiry would be sent to nearest Retrofitter
  • 3. Near By Retrofitter contacts you for inspection of the vehicle for checking the road worthiness and connected Legal documents like Registration No etc.
  • 4. On Completion of inspection and understanding the customer requirements in terms of Top Speed, Range , Acceleration required , the Retrofitter would give the Estimate and payment terms
  • 5. On Payment of Due price, the ICE is taken in for complete conversion into EV.

 

The Government of India felt the need for a permanent agency to expedite the publication of standards and development of test facilities in parallel when the work of preparation of standards is going on, as the development of improved safety critical parts can be undertaken only after the publication of the standard and commissioning of test facilities. To this end, the erstwhile Ministry of Surface Transport (MoST) has constituted apermanent Automotive Industry Standards Committee (AISC) vide order no. RT-11028/11/97-MVL dated September 15, 1997. The standards prepared by AISC will be approved by the permanent CMVR Technical Standing Committee (CTSC). After approval, The Automotive Research Association of India, (ARAI), Pune, being the secretariat of the AIS Committee, has published this standard. For better dissemination of this information, ARAI may publish this standard on their website. This standard prescribes the CCMVR Type Approval requirements for electric propulsion kit intended for conversion of vehicles for pure electric operation.

 Considerable assistance has been taken from the following UN regulations:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

HOT DIP GALVANIZING PLANT FOR (KUWAIT) PROJECT REPORT

HOT DIP GALVANIZING PLANT  FOR  (KUWAIT) PROJECT REPORT
  • HOT DIP GALVANIZING PLANT  FOR  (KUWAIT) PROJECT REPORT
  • HOT DIP GALVANIZING PLANT  FOR  (KUWAIT) PROJECT REPORT
  • HOT DIP GALVANIZING PLANT  FOR  (KUWAIT) PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryINDUSTRIAL
Service TypeHOT DIP GALVANIZING PLANT FOR (KUWAIT) PROJECT REPORT

Hot-dip galvanization is a form of galvanization. It is the process of coating iron and steel with zinc, which alloys with the surface of the base metal when immersing the metal in a bath of molten zinc at a temperature of around 449 °C (840 °F). When exposed to the atmosphere, the pure zinc (Zn) reacts with oxygen (O2) to form zinc oxide (ZnO), which further reacts with carbon dioxide (CO2) to form zinc carbonate (ZnCO3), a usually dull grey, fairly strong material that protects the steel underneath from further corrosion in many circumstances. Galvanized steel is widely used in applications where corrosion resistance is needed without the cost of stainless steel, and is considered superior in terms of cost and life-cycle. 



Project Reports
 are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

Modern Glass Crockery (Bottles, Glasses, Tumblers) Project Report

Modern Glass Crockery  (Bottles, Glasses, Tumblers) Project Report
  • Modern Glass Crockery  (Bottles, Glasses, Tumblers) Project Report
  • Modern Glass Crockery  (Bottles, Glasses, Tumblers) Project Report
  • Modern Glass Crockery  (Bottles, Glasses, Tumblers) Project Report
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryINDUSTRIAL
Service TypeMODERN GLASS CROCKERY (BOTTLES, GLASSES, TUMBLERS) PROJECT REPORT

This project proposal has been made for the manufacture of following modern glass crockery products as under:

 

•           BOTTLES

 

•           GLASSES

 

•           TUMBLERS

 

 

Container glass is a type of glass for the production of glass containers, such as bottles and drinkware.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

RECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT

RECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT
  • RECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT
  • RECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT
  • RECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryRECIRCULATING AQUACULTURE SYSTEM (RAS) PROJECT REPORT
Service TypeINDUSTRIAL

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

DIALYSIS FLUID PROJECT REPORT

DIALYSIS FLUID PROJECT REPORT
  • DIALYSIS FLUID PROJECT REPORT
  • DIALYSIS FLUID PROJECT REPORT
  • DIALYSIS FLUID PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryDIALYSIS FLUID PROJECT REPORT
Service TypeINDUSTRIAL

Dialysis fluid can be considered a drug to be adjusted to the individual patient's needs. In modern machines, dialysate is made by mixing two concentrate components, which may be provided as liquid or dry (powder) concentrates. The bicarbonate component contains sodium bicarbonate and sodium chloride; the acid component contains chloride salts of sodium, potassium (if needed), calcium, magnesium, acetate (or citrate), and glucose (optional). These two components are mixed simultaneously with purified water to make the dialysate. Dialysate proportioning pumps ensure proper mixing. The relative amounts of water, bicarbonate, and acid components define the final dialysate composition. Bicarbonate has replaced acetate as the dialysate buffer in most countries. Dialysate containing citrate (0.8 mmol/l) has recently been introduced, which may allow a reduction in heparin dose.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

MTO (MINERAL TURPENTINE OIL) PROJECT REPORT

MTO (MINERAL TURPENTINE OIL) PROJECT REPORT
  • MTO (MINERAL TURPENTINE OIL) PROJECT REPORT
  • MTO (MINERAL TURPENTINE OIL) PROJECT REPORT
  • MTO (MINERAL TURPENTINE OIL) PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryMTO (MINERAL TURPENTINE OIL) PROJECT REPORT
Service TypeINDUSTRIAL

Mineral Turpentine Oil (MTO) which is also known as turpentine substitute, is a cost effective petroleum-based replacement. It is a lighter fraction of hydro carbons that is drawn at the time of distillation.

 

 

Mineral turpentine oil consists of volatile fraction derived from petroleum. The main composition of the oil is paraffin, naphthenic and aromatic hydrocarbons in different propositions.

 

 

Mineral turpentine oil is distilled from petroleum which is a clear liquid known by the names petroleum spirit, solvent naphtha and mineral turpentine. Mineral Turpentine Oil wholesale dealers in India and in several other countries deliver 60% of the supplies to paint and lacquer manufacturing industries.

 

 

Mineral turpentine, also known as turpentine substitute, turps substitute, or just turps is an inexpensive petroleum-based replacement for the vegetable-based turpentine. It is commonly used as a paint thinner for thinning oil-based paint and cleaning brushes, and as an organic solvent in other applications.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

BIO-DEGRADABLE PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT

BIO-DEGRADABLE  PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT
  • BIO-DEGRADABLE  PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT
  • BIO-DEGRADABLE  PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT
  • BIO-DEGRADABLE  PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryBIO-DEGRADABLE PLATES & CUPS FROM ARECA LEAVES PROJECT REPORT
Service TypeINDUSTRIAL

The areca leaf plates are good biodegradable natural products. The areca leaf is abundantly available due to wide spread areca cultivation. The procured leafs are washed,soaked, moulded and baked using a simple leaf plate making machine. Currently these plates are used mostly in traditional, religious, auspicious occasions and in ceremonial functions and festivals.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

UREA AND DAP FERTILIZER PROJECT REPORT

UREA AND DAP FERTILIZER PROJECT REPORT
  • UREA AND DAP FERTILIZER PROJECT REPORT
  • UREA AND DAP FERTILIZER PROJECT REPORT
  • UREA AND DAP FERTILIZER PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryUREA AND DAP FERTILIZER PROJECT REPORT
Service TypeINDUSTRIAL

Urea, also known as carbamide, is an organic compound with chemical formula CO(NH2)2.  This amide has two –NH2 groups joined by a carbonyl (C=O)  functional group.

 

Urea is a very important industrial production which is much used in agricultural field as a fertilizer because urea contains high percentage of nitrogen. Urea dissolves in water very well.

 

Urea serves an important role in the metabolism of nitrogen-containing compounds by animals and is the main nitrogen-containing substance in the urine of mammals. It is a colorless, odorless solid, highly soluble in water, and practically non-toxic (LD50 is 15 g/kg for rats). Dissolved in water, it is neither acidic nor alkaline. The body uses it in many processes, most notably nitrogen excretion. The liver forms it by combining two ammonia molecules (NH3) with a carbon dioxide (CO2) molecule in the urea cycle. Urea is widely used in fertilizers as a source of nitrogen and is an important raw material for the chemical industry.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

MORTAR (READY MIX MORTAR/DRY MIX MORTAR PROJECT REPORT

MORTAR (READY MIX MORTAR/DRY MIX MORTAR PROJECT REPORT
  • MORTAR (READY MIX MORTAR/DRY MIX MORTAR PROJECT REPORT
  • MORTAR (READY MIX MORTAR/DRY MIX MORTAR PROJECT REPORT
  • MORTAR (READY MIX MORTAR/DRY MIX MORTAR PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryMORTAR (READY MIX MORTAR/DRY MIX MORTAR) PROJECT REPORT
service typeINDUSTRIAL

Mortar is a workable paste used to bind building blocks such as stones, bricks, and concrete masonry units together, fill and seal the irregular gaps between them, and sometimes add decorative colors or patterns in masonry walls. In its broadest sense mortar includes pitch, asphalt, and soft mud or clay, such as used between mud bricks. Mortar comes from Latin mortarium meaning crushed.

 

 

Cement mortar becomes hard when it cures, resulting in a rigid aggregate structure; however the mortar is intended to be weaker than the building blocks and the sacrificial element in the masonry, because the mortar is easier and less expensive to repair than the building blocks. Mortars are typically made from a mixture of sand, a binder, and water. The most common binder since the early 20th century is Portland cement but the ancient binder lime mortar is still used in some new construction. Lime and gypsum in the form of plaster of Paris are used particularly in the repair and repointing of buildings and structures because it is important the repair materials are similar to the original materials: The type and ratio of the repair mortar is determined by a mortar analysis. There are several types of cement mortars and additives.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

DRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)

DRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)
  • DRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)
  • DRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)
  • DRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryDRYING/DEHYDRATION (MOISTURE CONTROL DRYING) OF FRUITS & VEGETABLES (DRIED FLAKES ETC.)
Service TypeINDUSTRIAL

Dehydration of fruit and vegetables is one of the oldest forms of food preservation techniques known to man and consists primarily of establishments engaged in sun drying or artificially dehydrating fruits and vegetables. Although food preservation is the primary reason for dehydration, dehydration of fruits and vegetables also lowers the cost of packaging, storing, and transportation by reducing both the weight and volume of the final product. Given the improvement in the quality of dehydrated foods, along with the increased focus on instant and convenience foods, the potential of dehydrated fruits and vegetables is greater than ever.

 

 

Dried or dehydrated fruits and vegetables can be produced by a variety of processes. These processes differ primarily by the type of drying method used, which depends on the type of food and the type of characteristics of the final product. In general, dried or dehydrated fruits and vegetables undergo the following process steps: predrying treatments, such as size selection, peeling, and color preservation; drying or dehydration, using natural or artificial methods; and postdehydration treatments, such as sweating, inspection, and packaging.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

PATHOLOGICAL LAB PROJECT REPORT

PATHOLOGICAL LAB PROJECT REPORT
  • PATHOLOGICAL LAB PROJECT REPORT
  • PATHOLOGICAL LAB PROJECT REPORT
  • PATHOLOGICAL LAB PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryPATHOLOGICAL LAB PROJECT REPORT
Service TypeINDUSTRIAL

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

Mineral Powder (Quartz Powder, Dolo Mite Powder, Soft Stone, Soap Stone Powder Etc. Project Report

Mineral Powder (Quartz Powder, Dolo Mite Powder, Soft Stone, Soap Stone Powder Etc. Project Report
  • Mineral Powder (Quartz Powder, Dolo Mite Powder, Soft Stone, Soap Stone Powder Etc. Project Report
  • Mineral Powder (Quartz Powder, Dolo Mite Powder, Soft Stone, Soap Stone Powder Etc. Project Report
  • Mineral Powder (Quartz Powder, Dolo Mite Powder, Soft Stone, Soap Stone Powder Etc. Project Report
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryMINERAL POWDER (QUARTZ POWDER, DOLO MITE POWDER, SOFT STONE, SOAP STONE POWDER ETC. PROJECT REPORT
Service TypeINDUSTRIAL

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

WOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT

WOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT
  • WOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT
  • WOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT
  • WOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryWOOD PLASTIC COMPOSITES (WPC) PROJECT REPORT
Service TypeINDUSTRIAL

Wood-plastic composites (WPCs) are composite materials made of wood fiber/flour and plastic(s). In addition to wood fiber and plastic, WPCs can also contain other ligno-cellulosic and/or inorganic filler materials. WPCs are a subset of a larger category of materials called natural fiber plastic composites (NFPCs), which may contian other cellulose-based fiber fillers such as pulp fibers, peanut hulls, bamboo, straw, digestate, etc.

 

Wood-plastic composites are still new materials relative to the long history of natural lumber as a building material. The most widespread use of WPCs in North America is in outdoor deck floors, but it is also used for railings, fences, landscaping timbers, cladding and siding, park benches, molding and trim, window and door frames, and indoor furniture. Wood-plastic composites were first introduced into the decking market in the early 1990's. Manufacturers claim that wood-plastic composite is more environmentally friendly and requires less maintenance than the alternatives of solid wood treated with preservatives or solid wood of rot-resistant species. These materials can be molded with or without simulated wood grain details.


Project Reports
 are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

LAUNDRY AND DRY CLEANING PROJECT REPORT

LAUNDRY AND DRY CLEANING PROJECT REPORT
  • LAUNDRY AND DRY CLEANING PROJECT REPORT
  • LAUNDRY AND DRY CLEANING PROJECT REPORT
  • LAUNDRY AND DRY CLEANING PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryLAUNDRY AND DRY CLEANING PROJECT REPORT
Service TypeINDUSTRIAL

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

BIODEGRADABLE CUPS AND PLATES FROM BAGGASSE

BIODEGRADABLE CUPS AND PLATES FROM BAGGASSE
  • BIODEGRADABLE CUPS AND PLATES FROM BAGGASSE
  • BIODEGRADABLE CUPS AND PLATES FROM BAGGASSE
  • BIODEGRADABLE CUPS AND PLATES FROM BAGGASSE
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryBIODEGRADABLE CUPS AND PLATES FROM BAGGASSE PROJECT REPORT
Service TypeINDUSTRIAL

This is 100% BIODEGRADABLE & COMPOSTABLE tableware, which is widely used in various functions ,restaurants , festivals as ECO FRIENDLY single time (Use & throw) crockery , it’s produce by Plant extract or residue like Sugarcane Bagasse (SCB) etc., which is Proven Environment friendly 100% Biodegradable and Compostable and not harmful for food, human , soil and Nature. This is becoming more popular due to environment awareness ,climate change & NGT/State govt. bans on recyclable plastics

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

Led Bulbs/Tubes/Lights, Led Solar/Others Torches/Lanterns And Allied Led Products Project Report

Led Bulbs/Tubes/Lights, Led Solar/Others Torches/Lanterns And Allied Led Products Project Report
  • Led Bulbs/Tubes/Lights, Led Solar/Others Torches/Lanterns And Allied Led Products Project Report
  • Led Bulbs/Tubes/Lights, Led Solar/Others Torches/Lanterns And Allied Led Products Project Report
  • Led Bulbs/Tubes/Lights, Led Solar/Others Torches/Lanterns And Allied Led Products Project Report
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service modeONLINE
service duration1 DAY
service locationPAN INDIA
bussiness / industryLED BULBS/TUBES/LIGHTS,LED SOLAR/OTHERS TORCHES/LANTERNS AND ALLIED LED PRODUCTS PROJECT REPORT
Service TypeINDUSTRIAL

Light-emitting diodes (LEDs)—small colored lights available in any electronics store—are ubiquitous in modern society. They are the indicator lights on our stereos, automobile dashboards, and microwave ovens. Numeric displays on clock radios, digital watches, and calculators are composed of bars of LEDs. LEDs also find applications in telecommunications for short range optical signal transmission such as TV remote controls. They have even found their way into jewelry and clothing—witness sun visors with a series of blinking colored lights adorning the brim. The inventors of the LED had no idea of the revolutionary item they were creating. They were trying to make lasers, but on the way they discovered a substitute for the light bulb.

 

 

Light bulbs are really just wires attached to a source of energy. They emit light because the wire heats up and gives off some of its heat energy in the form of light. An LED, on the other hand, emits light by electronic excitation rather than heat generation. Diodes are electrical valves that allow electrical current to flow in only one direction, just as a one-way valve might in a water pipe. When the valve is "on," electrons move from a region of high electronic density to a region of low electronic density. This movement of electrons is accompanied by the emission of light. The more electrons that get passed across the boundary between layers, known as a junction, the brighter the light.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

SANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT

SANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT
  • SANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT
  • SANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT
  • SANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT
Get Best Quote
Approx. Price: Rs 6,900 / PieceGet Latest Price

Service Details:

service duration1 DAY
service locationPAN INDIA
service modeONLINE
bussiness / industrySANITARY NAPKINS AND BABY DIAPERS (AUTOMATIC IMPORTED PLANT) PROJECT REPORT
Service TypeINDUSTRIAL

Baby diaper may be a newly developed product for India, where as for European countries it has become a general necessity for newly born child caretaking.

 

 

The sanitary napkin industry is closely connected with the mode of life which is in turn directly correlated to housing. Accordingly this industry has always grown by keeping space with improvement in living and it is new indispensable for sanitary in modern housing.

 

 

In India, the technology for sanitary napkins available by processing of raw cotton spinning and weaving to napkins. On small scale, the processed cotton is purchased which is spinned and woven.

 

 

Sanitary napkin is a product used by women during the menstral period to treat menstruation. It is one of the daily necessaties for women.


 

Previously, in Japan, absorbent cotton was used for the purpose. But the use of absorbent cotton limited bodily movement considerabily.

 

 

Sanitary Napkin for Ladies monthly uses welldone enterprises can provide not only the standard type sanitary napking machine but also the specified machinery for producing any type sanitary napkin according to the requirement & specifications. Externding to the abilities of owe engineering, the machinery for producting maternity pad, adult’s pad are also available.

 

 

Baby diapers are infact novel items in our country, however in the developed contries they are very common. In India these are mainly used in urban area & higher income groups people. It is used mostly when people go for outings. Actually this product was developed by a sweedish firm in 1958. Baby diapers are becoming more & more popular as people are getting acquanited with its benefits.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested

LITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT

LITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT
  • LITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT
  • LITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT
  • LITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT
Get Best Quote

Service Details:

service modeonline
service duration1 day
service locationpan india
bussiness / industryLITHIUM-ION BATTERY ASSEMBLING & PACKING UNIT PROJECT REPORT
Service TypeINDUSTRIAL

A lithium-ion battery or Li-ion battery  is a type of rechargeable battery in which lithium ions move from the negative electrode to the positive electrode during discharge and back when charging. Li-ion batteries use an intercalated lithium compound as one electrode material, compared to the metallic lithium used in a non-rechargeable lithium battery. The electrolyte, which allows for ionic movement, and the two electrodes are the constituent components of a lithium-ion battery cell.

 

 

Lithium-ion batteries are common in home electronics. They are one of the most popular types of rechargeable batteries for portable electronics, with a high energy density, tiny memory effect and low self-discharge. LIBs are also growing in popularity for military, battery electric vehicle and aerospace applications. For example, lithium-ion batteries are becoming a common replacement for the lead–acid batteries that have been used historically for golf carts and utility vehicles. Instead of heavy lead plates and acid electrolyte, the trend is to use lightweight lithium-ion battery packsthat can provide the same voltage as lead-acid batteries, so no modification to the vehicle's drive system is required.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

 

 

 

  • Introduction
  • Properties
  • Uses & Application
  • B.I.S. Specifications
  • Market Survey
  • Present Manufacturers
  • Raw Materials
  • Formulations
  • Manufacturing Process
  • Process Flow Diagram
  • Details of Plant & Machinery
  • Suppliers of Raw Materials
  • Suppliers of Plant & Machinery
  • Plant Economics
  • Land and Building Costs
  • Plant and Machinery Costs
  • Other Fixed Assets
  • Fixed Capital Investment
  • Raw Material Costs
  • Salaries and Wages
  • Utilities and Overheads
  • Total Working Capital
  • Cost of Project
  • Total Capital Investment
  • Cost of Production
  • Turnover per Annum
  • Profitability Analysis
  • 5-year Profit Analysis
  • Break-even Point
  • Resources of Finance
  • Interest Installment Chart
  • Depreciation Chart
  • Cash Flow Statement
  • Projected Balance Sheet
Request
Callback
Yes! I am Interested
X

Explore More Service

View All Service


Reviews & Rating

4.1/5

★★★★★★★★★★

Reviewed by 37 Users

  • 5★43%
  • 4★22%
  • 3★8%
  • 2★13%
  • 1★14%
  • User Satisfaction
  • Response80%
  • Quality     88%
  • Delivery   90%

Most Relevant Reviews

S
★★★★★★★★★★
18-November-19
Sudhakar Babu
Vijayawada, Andhra Pradesh
Irequest hardcopy theypost the hard copy but still not received the project report hardcopy pl send me by corierir
Quality
R
★★★★★★★★★★
27-August-22
Raja Rudach
Ahmedabad, Gujarat
Response
Quality
Delivery
R
★★★★★★★★★★
24-April-22
Rusel Ahmed
Dinhata, West Bengal
Product Name : Tetra Pack Project Reports Consultancy
Response
Quality
Delivery

View More Reviews




Reach Us
Shubham Gupta (Director)
Kat Industrial Consultants Pvt Ltd
WORD TRADE CENTRE BARAKHAMBA ROAD NEW, Barakhamba Road, Connaught Place
New Delhi - 110001, Delhi, India


Call Us


Send E-mail