Pharma & Chemicals Based Project reports

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Boric Acid is white odorless and nearly tasteless powdered substance which is not  flammable combustible or explosive and it present no unusual hazard if involved in a fire. Boric Acid is used as an antiseptic for minor burns on cuts as eye drops to treat yeast and fungal infection such as candidacies, as an insecticide for control of cockroaches, termites, fire ants, fleas for manufacturing glass and fiber glass,

halogen light bulbs, laboratory glass ware and circuit boards in nuclear power plants to slow down the rate at which fission is occurring.
Boric acid, also called hydrogen borate, boracic acid, orthoboric acid and acidum boricum, is a weak, monobasic Lewis acid of boron often used as an antiseptic, insecticide, flame retardant, neutron absorber, or precursor to other chemical compounds. It has the chemical formula H3BO3 (sometimes written B(OH)3), and exists in the form of colorless crystals or a white powder that dissolves in water. When occurring as a mineral, it is called sassolite.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Citric acid was first isolated from lemon  juice and crystallised as a solid by Scheele in 1784. It is found as natural constituent of citrus fruits, pine apples, peaches, figs and other fruits and tissues. The citric acid extracted from these products is known as a"natural citric acid" in contrast to "fermentation citric acid" lemons, limes and pine apples are the principle  sources of natural citric acid, which  is  produced chiefly in Italy, especially Sicily, and  also in California, Hawai and the West Indies.It has made the United States self sufficient in respect to the citric acid supply and greatly changes the commerce of the world in citric acid and calcium citrate.Recent developments in the citric acid fermentation include the change from the older established shallow   pan method to a deep tank submerged method. A group headed by S.M. Martin of  the National Research laboratory of Canada has been especially active in the development of the submerged production of citric acid from ferrocyanide-treated beet molasses by Aspergillus Niger.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Colchicine is a medication most commonly used to treat gout. It is a toxic natural product and secondary metabolite, originally extracted from plants of the genus Colchicum (autumn crocus, Colchicum autumnale, also known as "meadow saffron").

Adverse effects are primarily gastrointestinal upset at high doses. In addition to gout, colchicine is used to treat familial Mediterranean fever, pericarditis, and Behcet''s disease.

Service Details:

Hydrated lime is a stable, dry, fine powder produced by the chemical  combination of quicklime with water. This is the most concentrated form of lime. Hydrated lime, apart from building industries, is also largely used in chemical industries as a cheapest alkali available. It is consumed in hundreds of solid liquid phase reactions. Hydrated lime requirements  definitely exceed the vast tonnage of quick lime required in dry, thermal processes  such  as  sintering, smelting, and fluxing etc. Hydrated lime is used for neutralization, coagulation, canticization, dehydration, hydrolyzation and absrption. It is also used as a flux in metallurgy, as a specified lubricant, as a bonding agent, as a filler, as a raw material and also in the manufacture of refractories. The present existing manufacturing capacity in the country for the manufacture of hydrated lime is not sufficient to meet  the  growing  demand of its dependent  chemical and other industries as also in building industry.  Raw materials, process equipments, and the  necessary  know-how involved in the manufacture of hydrated lime are available indigenously.

Service Details:

Chromium  was  discovered at the end of  18th  century,  was found  to  be  a  principal constituent  of  chromite,  the  sole commercial  source of chromium and its compounds. A  few  decades later  this ore was being subjected to oxidative roasting in  the presence  of  soda  and lime in  manually  operated  furnaces  to produce  water  soluble sodium di-chromate.  This  was  processed further  to yield yellow, red, and green chromium pigments  which were  used,  among  other  things,  for  dyeing  wallpaper;  they replaced  the toxic arsenic dyes that had been used  until  then. Chromium salts soon found their way into the textile industry  as mordants for the dyeing of wool.


Basic  chrome  chemicals are produced from chromite  ore  by reacting  an  alkali  lime and /or  after  diluents,  and  ground chromite  ore  in an oxidizing atmosphere at a  high  temperature (1000oC).   The chromate values  are  water-leached  from   the resulting   roast.  The chromate bleach is further  processed  to produce  various  chromium compounds and as sodium  chromote  and sodium bi-chromate which are the basic chemicals for most  chrome compunds.

Sodium dichromate-(Na2Cr2O7. 2H2O) also known as sodium  di chromate  or bi chromate of soda, is sold as crystalline  product and   as  a  solution  crystals  are  packaged  and  shipped   in multiwall,  moisture-resistant bags, in moisture resistant  fibre or   steel  drums  or  in  sparger  cars.  In  the  sparger   car system,crystalline  sodium  bi chromate is shipped dry  and  then unloaded by dissolving with water at the destination. This system provides  a  30% freight savings when compared  to  shipping  69% solution. Solution containing 69% Sodium bi chromate, which has a freezing point of 48oC (-59.4oC) is shipped in tank cars or tank trucks.

Service Details:

Calcium silicate (often referred to by its shortened trade name Cal-Sil or Calsil) is the chemical compound Ca2SiO4, also known as calcium orthosilicate and sometimes formulated 2CaO.SiO2. It is one of a group of compounds obtained by reacting calcium oxide and silica in various ratios e.g. 3CaO•SiO2, Ca3SiO5; 2CaO•SiO2, Ca2SiO4; 3CaO•2SiO2, Ca3Si2O7 and CaO•SiO2, CaSiO3. Calcium silicate is a white free-flowing powder derived from limestone and diatomaceous earth. It has a low bulk density and high physical water absorption. It is used in roads, insulation, bricks, roof tiles, table salt and occurs in cements, where it is known as belite (or in cement chemist notation C2S).

It is used as an anti-caking agent in food preparation and an antacid. It is approved by the United Nations' FAO and WHO bodies as a safe food additive in a large variety of products.

Service Details:

Calcium nitrate, sometimes called Norwegian saltpetre was the first synthetic  nitrogenous fertilizer to be put on  the market.  It has not, however, proved to be entirely  satisfactory for this purpose.  At the beginning of world war II, it accounted for about 8% of the nitrogen consumed in world's agriculture.  It is manufactured mainly in Europe.
 
Calcium  nitrate  is  generally known  as  lime  nitrate  or nitrocalcite  or lime salt peter or Norwegian salt peter.  It is available in two form one is in tetra hydrate form whose chemical formula  is Ca(NO3.4H2O. Another is simple calcium nitrate  whose chemical formula is Ca(NO3)2.

Service Details:

Straight fertilizers such as Calcium Ammonium Nitrate (CAN), Ammonium Nitrate (AN),Ammonium Sulphate (AS), Urea, Single Superphosphate (SSP), Triple Superphosphate(TSP), Potash (Potassium Chloride) (MOP) and combined types such as Mono-Ammonium Phosphate (MAP), Di-Ammonium Phosphate (DAP) are well-defined products made using well-defined processes.

Compound or complex fertilisers such as NPK, are more difficult to define as there is an infinite number of N/P/K-ratios and the processes applied in their production are numerous.

Service Details:

Nickel is usually divalent in its compounds; it shows only a feeble tendency to assume univalent, trivalent and tetravalent states and such ions are not stable in aqueous solution. Compounds of divalent nickel closely resemble those of divalent cobalt. Many nickel compounds are prepared from the oxide, hydroxide, or carbonate. They are yellow in the anhydrous form and green when hydrated or in solution. Nickel compounds are used manly in the production of nickel catalysts, electroplating, enamels and storage batteries. Nickel compounds are produced in India on a commercial scale by a few firms located in Mumbai, Punjab and West Bengal. As no workable deposits of nickel have so far been located in the country, nickel pellet (Ni, 99-100%) are imported for use as starting material. Nickel scrap and ickel anode waste are also used to some extent.

Nickel sulphate (electrolytic grade) is produced by the reaction of sulphuric acid on nickel scrap, Nickel pellets. 'Anode mud' from vanaspati/vegetable factory may also be treated with sulphuric acid and treated further to get pure Nickel sulphate.

The principal use for nickel sulphate is as an electrolyte for the metal finishing application of nickel electroplating. Nickel sulphate also is used as the electrolyte for the nickel electro-refining.

Service Details:

Sorbitol, also known as glucitol, is a sugar alcohol with a sweet taste which the human body metabolizes slowly. It can be obtained by reduction of glucose, changing the aldehyde group to a hydroxyl group. Most sorbitol is made from corn syrup, but it is also found in apples, pears, peaches, and prunes. It is converted to fructose by sorbitol-6-phosphate 2-dehydrogenase. Sorbitol is an isomer of mannitol, another sugar alcohol; the two differ only in the orientation of the hydroxyl group on carbon 2. While similar, the two sugar alcohols have very different sources in nature, melting points, and uses.

Sorbitol a polyol (sugar alcohol) is a bulk sweetener found in numerous food products. In addition to providing sweetness, it is an excellent humectant and texturizing agent. Sorbitol is about 60 percent as sweet as sucrose with one-third fewer calories. It has a smooth mouthfeel with a sweet, cool and pleasant taste. It is non-cariogenic and may be useful to people with diabetes. Sorbitol has been safely used in processed foods for almost half a century. It is also used in other products, such as pharmaceuticals and cosmetics.

Sorbitol was first isolated by the French chemist Joseph Boussingault in 1872 from the fresh juice of mountain ash berries. It has since been found in many natural products such as edible fruits (apples, plums, peaches, cherries, etc.), berries of mountain ash, hawthorn and Sorbus domestica, tobacco, algae, and red seaweed. In spite of its wide occurrence, natural materials are not a good commercial source of sorbitol, and it is made synthetically. The content of  sorbitol in grapes is insignificant and advantage is taken of this situation by using a sorbitol assay of grape wines as a means of detecting adulteration with other fruit wines or apple cider.

Service Details:

Carbon is probably the most widely distributed element in nature. It occurs in two allotropic crystalline forms viz. graphite (hexagonal system) and diamond (isomeric system), the former is soft and black while diamond is hard and transparent. Charcoal, coke and carbon black, classified as emorphous carbon; are considered by some to represent a third allotropic form. They are said to be composed of very minute crystals of graphite by others. Carbon is an essential constituent of all vegetable and animal matter in which it occurs in combination with hydrogen, nitrogen, oxygen and other elements in immense variety of compounds. In combination with hydrogen it occurs as hydrocarbons in petroleum.  It is also found in carbon dioxide in air (0.03% as sodium bicarbonate in sea water, and as calcium and magnesium carbonate in sedimentary rocks such as chalk and dolomite.

Service Details:

Ayurvedic system of medicine is as old as the Vedic age. Now-a-days people give preference to the Ayurvedic medicines as the allopathic medicines are costlier and have side effects. Ayurvedic medicines are based on plants, animals extract and minerals both in single ingredient drugs and compound formulations, however,

There are several categories of Kasthausadhi formulations such as Asavaristra, Avleha, Grafa Churena, Taila etc. and of Rasausadhis such as Bhasma, Pisti, Lauha, Kapibadkva, Rasayana etc. The Ayurvedic drugs are derived from vegetable sources from the various parts of the plant like root, leaf, flower, fruit extrude or plant as a whole.  Ayurvedic system has its origin in antiquity in our country which has been dedicated to the cure of innumerable ailments. It has been most indelible system for treatment which invariably stood to the test of time.

Service Details:

The commercial grade of calcium carbonate in manufactured in two forms. * Precipitated Calcium Carbonate, * Activated Calcium Carbonate, These  two forms of calcium carbonate differ in respect of coating which the former does not have and later has.  Both the forms of calcium carbonate are being used in various  industries as filler or extender,  thus assumes crucial  importance in chemical  and allied  industries. PVC Rubber, denitrified, cigarette paper,  printing ink, pharmaceutical are some  of  the calcium carbonate using industries. In this offer we have considered the product mix of Precipitated Grade which could cover very wide range of grades in terms  of  Particle  Size, Shape and  Distribution.  It  will  be possible to vary any of the three physical properties along with other physical  properties, such as Bulk Density, Flow Point, Viscosity, as required by individual customers as per their need. We have also considered 40 Tons per day capacity Activated calcium  carbonate with different coating arrangement as well as sophisticated Pressure Filtration and Drying System to ensure the quality product.

Service Details:

Phosphoric acid is an important intermediate chemical product. It is used mainly by the fertilizer industry. In 1980 the world wide production capacity for phosphoric acid yielded about 33 million tons of P2O5 equivalents.Pure 100% phosphoric acid is a white crystalline solid (monoclinic) that melts at 38.85oC to a syrupy liquid which has a strong tendency to super cool.

In dilute solutions, phosphoric acid has a pleasingly sour taste which is similar to but distinguishable from that citric, tartaric, lactic and acetic acids Rock phosphate is the major and essential raw material required for production as phosphoric acid by any route. Usually, when considering a phosphate rock as a potential raw material, the first approach is to analyze its chemical composition, i.e. the P2O5 content and its impurities.

Service Details:

We are an ISO 9001 : 2000 certified firm engaged in providing efficient Chemicals Industry Project Report to the clients.

Chemicals Industry Project Report is provided by our professionals after analyzing the exact requirements of the clients. The services we offer are highly acclaimed for their effectiveness, reliability and timely execution. 

We are backed by a team of dedicated professionals, who strive hard to provide efficient and effective services. They also facilitate the smooth and streamlined execution of all the business operations. Furthermore, we lay emphasis on executing error free services and that too within the promised time frame. 

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet