Printing and Packing Project Reports

Service Details:

kat industrial consultant pvt ltd. Undertakes export of industrial projects under its is associated with the exports of small scale industries products to other countries on turnkey basis. Kat provides a package of services for setting up of Paint Industry Project Reports to other countries which includes:

• Identification of viable projects.
• Conduct of feasibility studies.
• Preparation of project profiles and brief project reports.
• Selection and supply of plant and machinery from india.
• Deputation of experts for installation, commissioning and initial operation.
• Specialised training in india and at project site.

Priming paints are used for the first coat on previously unpainted surface to provide the foundation on which the durability of the finished painting largely depends; their composition is therefore of fundamental importance. The primer is required to be absorbed into the surface and to dry very hard without gloss the consistency is therefore rather thinner than that employed for subsequent coats. The medium is usually linseed oil thinned with sufficient volatile solvent to reduce the gloss and the solid constituent is normally a blend of white lead and red lead with a small portion of extender, the function of the red lead being to increase the hardness and impermeability of the film.  For interior work, where the protective value is not of supreme importance, these lead pigments are not essential and are often replaced by mixture of other pigments.

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Fruit drinks/juices can be classified as the liquid or liquid and pulpy material in relatively homogeneous forms derived from fruit.   Generally juices are entirely free of seed and tough fibers and of smooth consistency.  Juices are classified in three groups:- a) High Acid Juices, b) Medium Juices, c) Low acid or non-acid juices. High acid juices include the fruit drinks/juices in the PH range of 3.90 or lower i.e. Guava, Pine Apple etc. Medium acid juices include the fruit drinks/juices in the PH range 3.90-4.90 ie. Apples, Bananas, Mango etc. Similarly the fruit drinks/juices which are in the PH range of 4.80 or more are low or non-acid juices i.e. Beets, carrots etc. Fruit juices/drinks are recommended by physicians and taken to quence thirst and convey nourishment to the blood.  Moreover a glass of fruit juice is an excellent way start the morning meal with people of all ages.  In home as well as public eating places these fruit drinks in which Mango, Apple, Pine apple, Appricots etc. and other fruits are packed, can be blended and served.

Additional Information:

• Packaging Details: Plant Capacity 1.50 Lac Tetrapacks/Day Plant & Machinery Rs. 10.55 Cr. Total Capital Investment Rs. 12.75 Cr. Rate of Return 86%

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Corrugated Sheet Board & Boxes Project Reports

Service Details:

HDPE Ink is used for surface printed application on HDPE Woven Sacks specially for fertilizer grade packing, suitable for roll to bag and bag to bag printing. The printing on the Bags is done using these printing Inks through flexographic printing technology.
Today's printing inks are composed of a pigment a binder (an oil, resin or varnish of some kind), a solvent and various additives such as drying and chelating agents. The exact recipe for a given ink depends on the type of surface that it will be printing on and the printing method that will be used.  Inks have been designed to print on a wide range of surfaces from metals, plastics and fabrics through to papers.  The various printing methods are all similar, in that the ink is applied to a plate / cylinder and this is applied to the surface to be printed.  However, the plate / cylinder can be made of metal or rubber, and the image can be raised up above the surface of the plate, in the plane of the plate but chemically treated to attract the ink, or etched into the plate and the excess ink scraped off.

Service Details:

Aluminum is the most widely used non-ferrous metal and is extensively used in packaging materials. It is an excellent material for creating all types of containers. However, despite the fact that about seven billion aluminum foil containers are produced annually, most packaging engineers and packaging users know very little about the advantages that these containers bring to the packaging and food service industries

Specifically, aluminum provides an absolute barrier to protect foods, whether on the shelf, in the cooler or in the freezer. It can go from freezer to oven to broiler to microwave oven and result in quality food products whether at home or in central food processing operations. It is lightweight, so that it is easy and economical to transport. It is formable so that it is available in a wide variety of shapes and sizes. It can be printed, coated or embossed. And, it is recyclable which results in a 95% energy savings over that required to produce primary metal.

The growth of the aluminum foil container is due to its many advantages. The natural qualities of aluminum, its impermeability and barrier properties, provide real benefits for consumers. There simply is not a more versatile material.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Flex Banner is often better, especially when you have something to shout about. When you've got a special promotion or just want to give your business or event that extra push, Flex banners are a great way of shouting your name from the rooftops, and needn't cost a fortune. Our no-fuss digitally printed Flex banners are waterproof, UV resistant and available with a variety of finishing options. Flex banners have become the standard for cost-effective, high-impact outdoor advertising. Flex is the most versatile and easy to use material we print. Thanks to it's dense surface the print quality is unparalleled; ideal for photographic type images. Flex also ensures excellent flat ink coverage for blocks of colour. The lightly textured surface gives a professional sheen whilst minimising glare from lights. Our Flex banners and backdrops are equally at home with indoor and outdoor use, and are tough enough to withstand heavy use with no cracking, fading or splitting.

Service Details:

Fruit drinks/juices can be classified as the liquid or liquid and pulpy material in relatively homogeneous forms derived from fruit.   Generally juices are entirely free of seed and tough fibers and of smooth consistency.  Juices are classified in three groups:- a) High Acid Juices, b) Medium Juices, c) Low acid or non-acid juices. High acid juices include the fruit drinks/juices in the PH range of 3.90 or lower i.e. Guava, Pine Apple etc. Medium acid juices include the fruit drinks/juices in the PH range 3.90-4.90 ie. Apples, Bananas, Mango etc. Similarly the fruit drinks/juices which are in the PH range of 4.80 or more are low or non-acid juices i.e. Beets, carrots etc. Fruit juices/drinks are recommended by physicians and taken to quence thirst and convey nourishment to the blood.  Moreover a glass of fruit juice is an excellent way start the morning meal with people of all ages.  In home as well as public eating places these fruit drinks in which Mango, Apple, Pine apple, Appricots etc. and other fruits are packed, can be blended and served.

Service Details:

Aluminium is on abundant, slightly blue-white metal of high strength-to-weight ratio. Unalloyed aluminium sp.Gr.=  2.70  and its melting point=658.70C (12180F). is nonmagnetic and resistant to corrosion  & many chemicals at N.T.P. conditions.  Corrosion resistance is provided by a thin film (0.025m thick) of aluminium oxide which   quickly form on surfaces exposed to the atmosphere.Pure aluminium is highly  malleable with tensile strength = 13000 psi.(in anneale condition). When it is alloyed & heat-treated,its tensile strength can exceed 90,000 psi.
 Aluminium is used when high strength with  light weight, corrosion  resistance, easy  machinability formability etc. properties are desired.
Structural shapes of aluminium &its alloys  are  I-beams, channels,angles,Tees  &  ''Zs'' ehich can be produced by rolling & extrusion both sheet plate &foil are made by hot-rolling large rectangular cast ingots to the desired thickness.
Aluminium alloys suitable for processing with all majaor metal-working processes are available . Aluminium sheets have a greater  formability than steel or other materails when suitable grades of aluminium are considered. Aluminium plate &sheet caan be formed  easily when,preferably,in softer tempere.  Forming quality aluminium plate/sheet is designated by 4100-0, while deep  drawing  quality by 30030. Aluminium & its alloys  have  an equally good machinability and  welding/Brazing &soldering quality. That is why aluminium sheets are used in all fabrication industries to produces innumerable items.