SME Project Reports

Service Details:

Vegetation like all living things, requires  certain foods for its survival and growth. For this purpose fertilizers or farming are the materials to be added to the soil and  sometimes to foliage to supply nutrients to sustain plants and promote their abundant and fruitful growth. The elements that constitute these plants foods are divided into three classes. 1} Primary Nitrogen (N), phosphorus (usually expressed as P2O5), and potassium (expressed as K2O).2} Secondary - calcium (Ca),magnesium (Mg) and Sulphur (S). 3} and Minor or so called micro nutrients iron (Fe), manganese (Mn), copper(Cu)  Zinc(Zn), boron(B) and molybdenum. In      addition to their role as nutrients calcium  and magnesium are important in adjusting the pH and filth of the soil. Most of the farming of organic origin (animal or plant) contain several plant nutrients (particularly N & P as well as smaller quantities of K and trace elements) although in considerably  lower concentration than in inorganic  fertilizers organic farming however should be valued not only for their nutrient content but rather for thin beneficial effect on thesoil.

Service Details:

Commonly called alcohol has been described as one  of  the most exotic oxygen containing organic chemicals known because  of its unique  properties as solvent, beverage, combustible liquid, germicide and as building  block or chemical intermediate for  a host of organic chemicals. As a beverage it has been produced and utilized  unknowingly as early as 4000 years ago by  Pharaohs  in gypt.

In India ethyl alcohol has been conventionally and economically produced  by fermentation of a byproduct  of  sugar industry  i.e. molasses.  Although ethyl  alcohol  can  also  be produced   from  other  carbohydrate  containing  materials   by fermentation such  as sugar, cassava (tapioca), rice, wheat, barley and  other  grains,  the economics led  to  its  production  from molasses,  because  of its easy availability at a  low  price.  A flourishing distillery industry grew for production of  both potable and industrial alcohol from molasses.

Service Details:

Modular furniture is pre-made or ready made furniture which can be used according to the need and room spacing. Its easy to install & dismantle according to need & it gives modern look to your home or office. As looking to the limitation of space in apartment of flat, modular furniture is very helpful to save space. You can use them in different ways.

Modular furniture is less expensive in compare to its utility. Installed & dismantled in short period of time, easy to transport, can be installed according to use & choice & it bring modern look & feel in the room. They are flexible enough to arrange according to the choice. They also available in various colors & designs.

The most popular modular furniture for home is modular kitchen. Customization in furniture is possible according to the need. Modular bedroom, leaving room, shelf, almirah, cupboard, are available in long range. Also TV show case, study desk & computer table give different look to the room.

Modular office furniture has the advantages of being customized, accessible and convenient and therefore modular furniture is extremely popular in modern workplaces. Chairs, Desks, Workstations, Conference tables, Storage, Partitions, Filing cabinets & cubical are the most popular furniture presently preferred by most professionals.

Service Details:

LPG Cylinder is an essential item for filling liquefied petroleum gas used for cooling purpose. The body of LPG cylinder is deep drawn in two pieces then these are welded together to make a compact unit without any leak and defect etc. LPG cylinders are in use in 5 Kg., 12 Kg., 14.2 Kg. & 19 Kg. capacities. To ascertain the quality, safety and performance certain regulations are applicable such as BIS standardization and Explosive License etc. While all the cylinders are spray-painted with a signal red colour. BPC cylinders have yellow ring around the bung. HPC cylinders in blue ring and IOC cylinder are fully red. In case of 19 Kg. cylinder the top is painted olive green. The cylinders carry their complete history with regard to their serial number, Tare/ Gross weight, water capacity, ISE monogram test date, manufacturer identification and year of manufacturing.

Service Details:

Zinc EDTA is a derivative of Ethylene diamine Tetra acetic Acid. Ethylene diamine Tetra acetic Acid is a Sequestering / Chelating Agent. EDTA is a synthetic amino acid. It is widely known as EDTA. It is a white powder. EDTA Acid is insoluble in water. It is also named as Ethylene diamine Tetra acetate. It is widely used to dissolve Metallic Impurities. There are various Salts / Derivatives of EDTA.
EDTA is widely recognized as effective Sequestering Agent. EDTA grabs metallic cation such as Lead or Calcium from the process and forms a stable compound that is then excreted from the system. The stability of this bond is vital to get the success in removing the inorganic impurities out of the system. If the bond is weak, other chemicals can break this bond to form their own compounds.

Chelation is a special type of reaction in which a metal atom react with  compound containing donor atoms (Chelating agents) to form a complex compound. The type of bond in between the donor atom and the acceptor atom  (metal) is coordination bond.  The complex formed by such a bond is highly stable over a wide temperature range but are attacked by strong  oxidizing agents.

Service Details:

The  candle  making  has  been  practiced  and  despite  the introduction of mass production methods, candles can still be made by  well-established methods  which require only simple equipment. Much of this equipment can be made by rural craft men.

A candle is simply a solid cylinder of tallow, wax or other solid fat, containing a wick to give off light when burning. When the wick is lit, the flame radiates sufficient heat to melt a small pool of wax at the top of the candle. The liquid wax is then drawn up the wick by capillary action into the flame where it is vaporized and burnt. The size of the flame is important and should be related to the diameter of the candle.

Service Details:

The footwear sector is a very significant segment of the leather industry in India; rather it is the engine of growth for the entire Indian leather industry.

India is the second largest global producer of footwear after China, accounting for 13% of global footwear production of 16 billion pairs. India produces 2065 million pairs of different categories of footwear (leather footwear - 909 million pairs, leather shoe uppers - 100 million pairs and non-leather footwear - 1056 million pairs). India exports about 115 million pairs. Thus, nearly 95% of its production goes to meet its own domestic demand.

The major production centers in India are Chennai, Ranipet, Ambur in Tamil Nadu, Mumbai in Maharastra, Kanpur in U.P., Jalandhar in Punjab, Agra, Delhi, Karnal, Ludhiana, Sonepat, Faridabad, Pune, Kolkata, Calicut and Ernakulam. About 1.10 million are engaged in the footwear manufacturing industry.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Cement industry is one of the  most  important basic industries on which depends the economic health of a developing country. In fact are of the  important  indicators  of  the industrial vitality of a country is its per capita consumption of cement. For Japan it is 670 Kgs. for Germany 544 Kgs, for the US 341 Kgs. and for singapore 540 kgs. unfortunately for India it is low at 32 kgs.  India is the eleventh largest producer of  cement in  the world, with an installed capacity of 26.5 million  tonnes and  an investment of Rs. 280 crores in 55 units spread all  over the country providing employment to over 80,000 persons.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Corrosion is a chemical process and causes the wastage as a chemical action is of two types, (a) Direct Chemical Corrosion (b) Electro-Chemical attack. Due to both types of reactions there is decrease in the free energy of the system. Direct chemical corrosion takes place  when a   metal is in contact with gases or moisture.  Electro-chemical attack  is  brought about when a metal is immersed in  a  liquid, there is a current set up in the system. The  current is  carried by  electrodes  of  the  corroding metal  and  the  ions  of  the solution.  The  current is carried by the metal ions  which  pass into solution or by ions in the solution which may or may not  be metal ion, depositing over the metal surface.

In  water  cooling  system,  poly  phosphate  nitrites,  and chromates  has been used, although in recent year the use of  the alter  has  been  discouraged even in closed system  because  of environmental  consideration.  The anti-freeze mixtuers  used  in automoblie  cooling systems present a difficult  problem  because of  the presence of metal like, iron, copper,  lead-tin  solders, aluminium, as well as rubber are in contact, encourages  galvanic corrosion.  The successful chemical are Borates,  PolyPhosphates, and mercapto benzothiazole (an organic inhibitors).

Other corrosion inhibitors are chromate with poly phosphates zinc or both, zinc with phosphonates or silicate, phosphonatemolybdate or lignin derivation, and polyphosphate with phosphonate or silicate.

Service Details:

Food Products Complex (Dehydrated Onions, Garlic Powder & Flakes, Cattle Feed, Tomato Powder, Tomato Products, Canned Fruits & Vegetables, Tomato Puree, Groundnut Oil, Refined Oil, Dehydrated Grapes Etc.)

The main advantages of dehydrated onions are that they are easy to store, being lighter in weight and smaller in bulk than fresh or other processed onions, they are cheap to pack compared with canned goods, they do not require refrigerated storage as do frozen onions and the contents of a container can be used some time after opening provided they are not rehydrated. The newest dehydration process appears to be a variation on the air-drying process and is based on the principle of vapour pressure differentials, using air circulated around the onions at relatively low temperatures to ‘sweat’ the water from the food.  It is reported that this method of dehydration prevents a crust forming on the outside of the pieces of food and that the low temperatures have less effect on flavour, texture, colour and vitamin contents of onion than do the higher temperatures used in conventional hot air-drying methods.

Service Details:

We are an ISO 9001 : 2000 certified firm engaged in providing efficient Rubber Industry Project Reports to the clients. 

Rubber Industry Project Reports is provided by our professionals after analyzing the exact requirements of the clients. The services we offer are highly acclaimed for their effectiveness, reliability and timely execution. 
We are backed by a team of dedicated professionals, who strive hard to provide efficient and effective services. They also facilitate the smooth and streamlined execution of all the business operations. Furthermore, we lay emphasis on executing error free services and that too within the promised time frame.
By the application of heat and chemical agents followed by intense mechanical working to ground vulcanized scrap or worn out rubber tires, tubes and waste rubber articles, a substantial regeneration on devulcanisation of the rubber compound to its original plastic state is effected, thus permitting the product to be compounded, processed and revulcanised. There are several types of rubber powder made in different ways.They may be lightly vulcanized and may contain appreciable quantities of anti-agglomerating agents to prevent massing on storage. The trend now-a-days is towards automation in production of rubber goods during handling,mixing and processing. The powder forms of rubber is very easy to be handled. The advantages of powder processing  have been recognized and  include (a) rapid and inexpensive mixing ; (b) flexibility in compounding. Powder handling equipments are used in plastics industry also; hence those equipments can be utilised for compounding of powdered rubber before actual processing;thus integration of the two industries can be done without much extra capital outlay. 

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Tooth picks are short wooden splints, having a sharp end at one side, which when inserted in the cavities in between the two teeth in the mouth take out the deposited food particles. Tooth picks are therefore, very useful small item for preserving out teeth from decay, weakening etc.

A toothpick is a small stick of wood, plastic, bamboo, metal, bone or other substance used to remove detritus from the teeth, usually after a meal. A toothpick usually has one or two sharp ends to insert between teeth. They can come in both wood and plastic, and can also be used for picking up small
appetizers (like cheese cubes or olives) or as a cocktail stick.

Tooth picks are mostly used in restaurants and hotels. But with the modernity and education, people in their homes are also keeping the tooth picks.The tooth picks are prepared by a series of wood working operations. The tooth pick manufacture is a very simple process and does not require much skill.

Service Details:

Wooden toys not only appeal to children for play, but also to adults for home and office decorations. Manufacturing wooden toys is a wonderful home based business opportunity that can be activated for peanuts and has the potential to return big profits. Marketing the toys can be accomplished by way of wholesale sales to merchants, the internet, mail-order catalogs, craft shows, mall kiosks and home shopping parties.

Traditionally, popular wooden toys include trains, jigsaw puzzles, cars, numbered building blocks and wooden soldiers. But that's just the tip of the iceberg. The only limitation to the different kinds of wooden toys that can be designed and manufactured is your own imagination. Additionally, approach local building and home improvement centers to see if they'll let you set up a mini-manufacturing facility right in their store. If this can be accomplished, it would be a great marketing tool to be able to build the toys in front of a live audience.

The requirements for type of woodworking business enterprise are relatively basic, and include woodworking skills and a well-equipped woodworking shop. Design and building plans are available for various types of wooden toys, or you can design your own toys as your skills improve. In the age of being politically correct, it's not a bad idea if you were to use only recycled wood to make your toys. Not only would you be helping the environment and saving money on material costs, but it can also be a useful and powerful marketing tool. Recyclable wood material includes beach driftwood, used building materials, cedar rail fencing, pallets, packing crates and fallen forest brush. And most, if not all, of these waste wood materials can be acquired for free.

Service Details:

Packaged Drinking Water (Mineral Water) originally meant water from various natural springs which are thought to be having medicinal and curative value. These spring waters, although contain dissolved chemicals of medicinal properties, also contain harmful micro-organisms. Besides this the underground and surface water is also not potable due to hardness as well as due to presence of toxic substances and Bacteria. This re­quires suitable treatment and purification to make it safe and potable drinking water with long shelf life. The water is packed in suitable food grade packing generally in PVC or PET Bottles of differ­ent capacities.

Service Details:

The  use of tobacco originated in America, and the  name  is probably  derived  from the original work used  to  describe  the pipes  employed  by  the carile Indians  for  smoking  the  weed. Tobacco  is  said  to  have been introduced  into  India  in  the beginning  of  17th century. As else where in the world,  It  has thrived inspite of considerable neglect and social disapproal. The  genus  Nicotiana  is one of the five  large  genera  of solanaceae,  and is represented by about 60  recognised  speceis. Out  of  the 60 species only two species  Nicotiana  tabacum  and Nicotiana  rustica most popular and are used in  different  ways.

Service Details:

Bricks may be made from a no. of different kinds of material, but they must usually possess (can be capable of developing)  a certain amount of plasticity.  fly ash is one of them.  Fly-ash is an industrial waste of thermal power stations using pulverised coal.  it is finely divided residue, resulting from the combustion of pulverised coal in the boiler, which is transported by the flue gases and subsequently collected by means of electrical or mechanical precipitators. There are about 40 major thermal power plants in India which produces about 15 million tones of fly ash every year.  Such enormous quantities need huge dumping grounds, and create pollution problems. Fly ash being a puzzolanie material forms cementations products in conjunction with time and thus find use in civil Engineering Works.  In advanced countries fly ash has been used in variety of product during the last 2-3 decades.  Whereas in this country a very limited use of fly ash has been made in hydraulic structures.  However, very little has been done on the diversified use of lips fly ash viz. in road construction soil slabbing precast block etc.

Service Details:

The term ‘Plywood’ covers a form of laminated xaves in which successive  layers of veneer are ordinarily cross laminated,  the care of which may be veneer or sawn lumberr in are piece  several pieces.  It  is a high pressure bonded wood product  conposed  of layers of waves with resin as the laminating agent. Kitply is one of the largest manufacturers of plywood in the country  and  manufactures one of the widest range  like  marine, shuttering,  compreg,  decorative and other special  grades.  its factory at Tinsukia is equipped with modern machinery and  highly sophisticatede  hydraulic  heavy duty hot  presses.  The  testing laboratory  is fully furnished with the latest  testing  machines and  scientific instruments for conducting  physical,  mechanical and electrical testing as per buyers’ specifications.

Service Details:

The  term  marble is derived from the  latin  work  "MARMOR" which  itself comes from the Greek root "MARMAROS" meaning  these by  a  shining  stone.  In ancient times, any  stone  capable  of taking polish, without any regard to its chemical composition was designated  as  marble.   Even the  serpentines,  alabaster,  and granites  was categorized as marble - if they could take  polish.  However,  in  course  of time, earth sciences  developed  a  more sophisticated  and accurate classification which  can  categories rocks on the basis of their birth-history.

The  marble industry in India has a chequered history.   The first marble stone in India was found in the Makrana of erstwhile Rajputana,   It  was  the  marble of Makrana  that  was  used  in fabulous monumental structure erected centuries ago in India  and elsewhere.   The  world-famous Taj Mahal at  Agra,  the  Victoria Memorial  at  Kolkata and Jaswant Memorial at Jodhpur  bear  the testimony to the marble supplied from Makrana.  The  construction viability  of marble stone has been proved beyond doubt as  these structures  have  weathered the vagaries of climate  through  the centuries.

Gone  are the days when marble was considered to be an  item of  luxury and used only in palaces, temples, mosques  and  other prestigious  buildings.  It is now extensively used  in  ordinary buildings,  in  drawing  rooms,  dining  rooms,  bath  rooms  and kitchens.   Central Public Works Department has specified  marble to be used in the Kitchen Platform of even staff quarters.

Service Details:

Poultry farms are increasing steadily. Many government agencies are encouraging poultry farming and even short term training courses are organised regularly. Such farms have generated considerable employment opportunities in semi urban and rural areas. Marketing of poultry birds is expensive and death of birds during transit is the main bottleneck. This compels most of the poultry farms to concentrate on nearby markets even if it means less prices. Instead, if these birds are processed after dressing and packed in tins then transportation is easier, shelf life of the product goes up and the product is more hygienic. It is believed that the indian Poultry Industry is 5,000 years old, since last 4 decades it began to witness remarkable growth from backyard to poultry industry. The organised sector of poultry industry is contributing nearly 70% of the total output and the rest 30% in the unorganized sector.

Service Details:

Starch is an abundant carbohydrate distributed worldwide in plants. Starch has been a major ingredient in man's diet over the centuries. In addition it has become a major industrial raw material. Plant seeds, roots and tubers are all sources of industrial starch production. The commercial realities of the starch recovery process limit the industrial sources mainly to wheat, maize and tapioca. Indian starch industry mainly consumes maize as input raw material.

Service Details:

Aluminium sulfate (Al2(SO4)3), commonly called alum, is produced as white crystals which are non-combustible and soluble in water. This .dry. hydrate (Al2(SO4)3.14H2O) is 17% Al2O3 and is also sold as a 47% w/w aluminium sulfate solution which is 8% Al2O3. It is also sold in solid form as kibbled, ground or dust.

Alum are represented by the general formula R1/2 SO4, R2"(SO4)3.24.H2O. Where R and R"are respectively monovalent and trivalent radicals. They are usually the double salts of ammonium, potassium or sodium sulphate with aluminium. Chromium or iron sulphate and are readily preparedy by concentrating and cooling a solution containing molecular proportions of the Component Sulphate.

Ferric and Non Ferric Alum is marketed in various grades. The cheapest grade called "alum cake". Potash alum also known as alum alumen.

Ferric alumin is aluminium sulphate containing iron obtained from the bauxite ore. Potash alum is prepared from its naturally occurring minerals such as alunite and Ratinite, but in India these do not occur in appreciable quantities.  Alum was formerly prepared from alum shales by roasting them in year and leaching it out with water. Alum is now produced in India by crystallizing   together equivalent produced in India by Crystallizing together equivalent proportion of potassium sulphate and aluminium sulphate. The solution is concentrated and the crystals are separated out are melted to yield lump alum or recrystalized to obtain large crystals.

Service Details:

Controlled atmosphere storage is a system for holding produce in an atmosphere that differs substantially from normal air in respect to CO 2 and O2  levels. Controlled atmosphere storage refers to  the constant monitoring and adjustment of the CO2  and O2  levels within gas tight stores or containers. The gas mixture will constantly change due to metabolic activity of the respiring fruits and vegetables in the store and leakage of gases through doors and walls. The gases are therefore measured  periodically  and  adjusted  to the  predetermined  level  by the introduction of fresh air or nitrogen or  passing the store atmosphere through a chemical to remove CO2.

There are different types of controlled atmosphere storage depending mainly on the method or degree of control of the gases. Some researchers prefer to use the termsstatic controlled atmosphere storage and flushed controlled atmosphere storage  to define  the two most commonly  used  systems.   Static  is  where  the  product  generates  the  atmosphere  and flushed is where the atmosphere is  supplied from a flowing gas stream, which purges the store continuously. Systems may be designed which utilize flushing initially to reduce the O2 content then either  injecting  CO2   or allowing  it to  build up through respiration,  and then maintenance of this atmosphere by ventilation and scrubbing.

Service Details:

We are providing the Business Setup Consultancy Services to our clinet as per the requirement.

Service Details:

We provide project reports on Ink And Stationery Products Project Reports.

• Artists Colours
• Automatic Pen Refills Plant
• Ball Pen Nozzel
• Ball Poit Pen Ink
• Ball Point Pen Inks & Refills
• Ball Poin Pen Refills
• Ball Point Pen Refills (Jotter Type)
• Book Publication Unit
• Carbon Paper
• Card Board State
• Chalk Crayon
• Chalk Manufacturing
• Colouring of Pencil
• Computer (Continuous Stationary)
• Diary, Book Covers, Purses
• Disposable Ball Pens
• Drawing Ink (Water Proof)
• Duplicate Stencil Paper
• Duplicating Ink
• Dustless Chalk
• Exercise Note Book & Register
• Fiber Tip Pens
• Flexographic Printing Ink
• Flexographic Rotograure Inks
• Flock Printing
• Fluoroscent Marking Pen
• Gravure Ink
• Ink for black Board/Takhti
• Jute Bag Marking Ink
• Lead Pencils
• Magic Slates
• Marking Ink
• Note Books, Registers & Files
• Offset Printing Inks (Coloured)
• One Time Carbon
• Pad Inks
• Paint Removers
• Paper Pins, GEM Clips & Stappler
• Pencil Carbon Papers
• Pencil Sharpener Blade
• Pencil Slates
• Pencils
• Photo Emulsion for Rotary Screen Printing
• Photo Garvure and Flexographic Printing Ink for Plastic film
• Pointed Nozzel (Tip) Ink Pen
• Premixed Tonner Ink Paste
• Printing Ink
• Printing of Multicoloured Labels
• Rubber Eraser
• Screen Printing Inks
• Stamp Pad
• Stencil Ink
• Textile Golden Marking Ink
• Tin Enamelled Slate Industry
• Tonner (In Powder Form)
• Tonner Ink
• T-Shirt Screen Printing Inks
• Water Proofing Inks
• Web Offset Printing Ink
• Wooden Duster
• Artists Colours
• Automatic Pen Refills Plant
• Ball Pen Nozzel
• Ball Point Pen Ink
• Ball Point Pen Inks & Refills
• Ball Point Pen Refills
• Ball Point Pen Refills (Jotter Type)
• Book Publication Unit
• Carbon Paper
• Card Board State
• Chalk Crayon
• Chalk Manufacturing
• Colouring of Pencils
• Computer (Continuous Stationary)
• Diary, Book Covers, Purses
• Disposable Ball Pens
• Drawing Ink (Water Proof)
• Duplicate Stencil Paper
• Duplicating Ink
• Dustless Chalk
• Exercise Note Book & Register
• Fiber Tip Pens
• Flexographic Printing Ink
• Flexographic Rotograure Inks
• Flock Printing
• Fluoroscent Marking Pe
• Gravure Ink
• Ink for black Board/Takhti
• Jute Bag Marking Ink
• Lead Pencils
• Magic Slates
• Marking Ink
• Note Books, Registers & Files
• Offset Printing Inks (Coloured)
• One Time Carbon
• Pad Inks
• Paint Removers
• Paper Pins, GEM Clips & Stappler
• Pencil Carbon Papers
• Pencil Sharpener Blade
• Pencil Slates
• Pencils
• Photo Emulsion for Rotary Screen Printing
• Photo Garvure and Flexographic Printing Ink for Plastic film
• Pointed Nozzel (Tip) Ink Pen
• Premixed Tonner Ink Paste
• Printing Ink
• Printing of Multicoloured Labels
• Rubber Eraser
• Screen Printing Inks
• Stamp Pad
• Stencil Ink
• Textile Golden Marking Ink
• Tin Enamelled Slate Industry
• Tonner (In Powder Form)
• Tonner Ink
• T-Shirt Screen Printing Inks
• Water Proofing Inks
• Web Offset Printing Ink
• Wooden Duster

Service Details:

Pouches Filling & Packaging Oil Project Reports