Steel Iron & Allied products project reports

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Mild Steel Galvanized steel wire popularly known as galvanized wire have extensive application in various field. It has got excellent demand in pre-stressed concrete product like railway sleeper, telegraph and telephone, electric pole etc. and also find ample application in pre-casted cement product like pipes, frames of door and windows etc. On the other hand it has its own market in the field of strands and also its domestic demand cannot be ignored. The M.S. Wire are drawn to required dia and then galvanized i.e. coating of zinc is employed on it, gives excellent anti corrosion property to steel wire.

Project Reports are based on desk survey. They provide the pre-investment information required for promoters. Before setting up the project, it is necessary to assess the market potential for the goods proposed to be manufactured. These reports answer the most frequently asked questions on all the aspects of a new project.

 

Each Project Report contains the following details as under:

 

• Introduction
• Properties
• Uses & Application
• B.I.S. Specifications
• Market Survey
• Present Manufacturers
• Raw Materials
• Formulations
• Manufacturing Process
• Process Flow Diagram
• Details of Plant & Machinery
• Suppliers of Raw Materials
• Suppliers of Plant & Machinery
• Plant Economics
• Land and Building Costs
• Plant and Machinery Costs
• Other Fixed Assets
• Fixed Capital Investment
• Raw Material Costs
• Salaries and Wages
• Utilities and Overheads
• Total Working Capital
• Cost of Project
• Total Capital Investment
• Cost of Production
• Turnover per Annum
• Profitability Analysis
• 5-year Profit Analysis
• Break-even Point
• Resources of Finance
• Interest Installment Chart
• Depreciation Chart
• Cash Flow Statement
• Projected Balance Sheet

Service Details:

Metals  other  than iron and steel are  desscribed  as  non-ferrrous  metals.  For example, Almunium, Bronze,  Copper,  Lead, Silver,  Zinc  & other precious metals.  Copper  is  the  perfect material for recycling.  It is valuable, ewasy to identify,  easy to  clean, heavy and can be of much use to  foundries,  melters,& other   non-ferrous  industries,  as  scrap.   Copper  has   many important alloy eg.bronze (contains copper, tin & Zinc) and brass (which   contains   copper   &   zinc   only).    To   discourage thefts,scraps are packed in oil drum & hammered the ends over.

Pure copper may include scraps from factories making copper products, usually they reclaim if themselves, but ends of  copper tubes used is domestic water systems & other buildings, prices of electrical machines, wire & power cable etc.

Service Details:

Wire nail are used to join many things in industries and in other domestic items. The are made of hard carbon wire. They are headed on one end and sharp at another end. The head is used for hammering and sharp end help in penetrating into the object which is to be joined.  WIRE nail is one hardware that is used mainly in Building construction work, manufacturing boxes for packing etc. due to the increasing population and the necessities attached to it, they are always in demand in the market join small items.

Service Details:

Castings   of  suitable  shape  and  size  intended  for subsequent hot working are termed as Ingots. Ingot  iron  has  very low carbon  in  steel.   This  is generally made in the open hearth in which all the other elements are  removed  to  the  maximum  extent  possible.   Some  of  the commercial products falling under this group have less than  0.1% of all non-iron elements put together.

Ingots are cast in ingot moulds which are the containers usually  made  of cast iron into which molten steel is  poured  & allowed to solidify.

Mild  steel  ingots are carbon steels  only  containing, usually,  0.15 to 0.25% of carbon.  These may be fully deoxidized to  reduce  the oxygen content of the steel to a minimum  inorder that  no  reaction takes places between carbon  &  oxygen  during solidification.  Such steels are called "Killed Steel". Most  of the bars and structurals are mfd.  in  standard sections/sizes.

Service Details:

Reinforcing steel bars are used to help concrete withstand tension forces. Concrete by nature is sufficiently strong to compression forces, although tension forces can crack concrete. Deformed re-bars on reinforcing steel was made a standard requirement since 1968, however, plain re-bars are also used in situations where the reinforcing steel is expected to slide as usually installed in highway pavement and in segmental bridges. The deformed patter on a rebar will help the concrete to adhere to the reinforcing steel surface. The pattern on a deformed bar is not specified, however, the spacing, and the height of the ‘bumps’ is regulated.

Service Details:

Mild Steel Galvanized steel wire popularly known as galvanized wire have extensive application in various field. It has got excellent demand in prestressed concrete product like railway sleeper, telegraph and telephone, electric pole etc. and also find ample application in pre-casted cement product like pipes, frames of door and windows etc. On the other hand it has its own market in the field of strands and also its domestic demand can not be ignored. The M.S. Wire are drawn to required dia and then galvanized i.e. coating of zinc is employed on it, gives excellent anticorrosion property to steel wire.

Service Details:

Mild Steel Galvanized steel wire popularly known as galvanized wire have extensive application in various field. It has got excellent demand in pre-stressed concrete product like railway sleeper, telegraph and telephone, electric pole etc.and also find ample application in pre-casted cement product like pipes, frames of door and windows etc. On the other hand it has its own market in the field of strands and also its domestic demand cannot be ignored. The M.S. Wire are drawn to required dia and then galvanized i.e. coating of zinc is employed on it, gives excellent anti corrosion property to steel wire.

Service Details:

We are providing the wide range of project reports services to our client as per their requirements.

MIG Wire is Copper coated strong wire. MIG wires are applied to weld numerous ferrous and non-ferrousmaterials and give sound results Solid copper coated welding wire for welding in gas shielding atmospheres. The high silicon contents and manganese alloyed in this wire. The higher contains of silicon and manganese increase the yield stress and tensile strength of weld metal. The high silicon content promotes a low sensitivity to surface impurities and contributes to smooth weld. Suitable for welding unalloyed and low alloyed construction steels with tensile strength below 640N/mm2 like boiler plate, fine grained steels, pipe steels, shipbuilding steels and cast steels.

Service Details:

Aluminium foil is a thin sheet of metal. As such it can be an absolute barrier to moisture, gases, odors, bacteria and moulds. The high reflectivity of aluminium ensures good protection against radiant heat, whilst its opacity is important in preventing deterioration of a very large range of foods and drinks which are affected by light. It is used for packaging and non packaging uses. The growth of this industry has been in the recent past, owing to the growing application of foil in a variety of products. India is one of the key producers of aluminium foil in the region. Over 70% of aluminium foil used in India is for packaging applications.

The Foil is a continuous web of aluminium metal rolled to thickness ranging from 0.005 mm to a maximum of 0.15 mm. Foil is available in many forms, Le., hard, soft (annealed), lubricated, non-lubricated plain, coated, coloured, printed, embossed and laminated to a variety of paper and synthetic films.

Service Details:

Thermo mechanically treated (TMT) steel, can be described as a  new-generation-high-strength steel having superior  properties such  as  weldability, strength, ductility and  tensility,  which meet the highest international quality standards.

Features:

Resists fire: Withstands temperatures up to 5,000C.

Resists  corrosion:  The  TMT  process  gives  the  bar  superior strength and anti-corrosive properties.

Earthquake resistance: The soft ferrite-pearlite core enables the bar to bear dynamic and seismic loading.

Malleability:  TMT  bars  are most  preferred  because  of  their flexible nature

Enables welding: They have fine welding features.

Bonding strength: External ribs running across the entire  length of the TMT bar give superior bonding strength between the bar and the concrete.

Cost-effective:  A  high tensile strength and  better  elongation value gives you great savings

Service Details:

Doors, windows and ventilators are essential component of all types of buildings - residential, commercial and  industrial. House building has been a need and beautifying the buildings  has been a love for mankind from the time immemorial. Doors are  used for  providing entrances from outside into the building  and  for inter  room  connections  for  easy  approach.  Ventilators   are provided  for  sun rays and light, into the dwelling  houses,  in sufficient  quantity  windows  play larger roles  in  the  entire building  construction  for enhancing the utility of  the  house. Windows  are  provided  in  building walls in  as  many  nos.  as possible. This is so because windows serve in a lot  many  ways. Most  of  the  air passage takes places  through  these  windows. Similarly, light and sun get entry through windows quite freely. Windows  provide  cross  ventilation in  many  cases. 

Both   ferrous  and  non-ferrous  metals  are   useful   for manufacturing window frames. Metallic frames are mass-provided in engineering  industries  and provide open gaps for  fixing  glass panes of various sizes to make it transparent. Securing the glass in the metal window frame is termes as glazing with the aid of strips  of metal or timber and putty. The glass pieces are fixed with various techniques to the metallic window frames e.g. fixing single  units, fixing composite units etc. Normal conditions  are observed while fixing and glazing.

Service Details:

Aluminium is on abundant, slightly blue-white metal of  high strength-to-weight  ratio. Unalloyed aluminium sp.Gr.=  2.70  and its melting point=658.70C (12180F). is nonmagnetic and  resistant to  corrosion  & many chemicals at N.T.P.  conditions.  Corrosion resistance is provided by a thin film (0.025m thick) of aluminium oxide   which   quickly   form  on  surfaces   exposed   to   the atmosphere.Pure  aluminium  is  highly  malleable  with   tensile strength = 13000 psi.(in anneale condition). When it is alloyed & heat-treated,its tensile strength can exceed 90,000 psi.

 Aluminium  is  used when high strength  with  light  weight, corrosion   resistance,  easy  machinability   formability   etc. properties are desired.

Structural  shapes  of aluminium &its  alloys  are  I-beams,  channels,angles,Tees  &  ''Zs'' ehich can be  produced  by  rolling & extrusion both sheet plate &foil are made by hot-rolling  large rectangular cast ingots to the desired thickness.

Aluminium  alloys  suitable for processing  with  all  majaor metal-working  processes are available . Aluminium sheets have  a greater  formability than steel or other materails when  suitable  grades  of aluminium are considered. Aluminium plate &sheet  caan be  formed  easily  when,preferably,in  softer  tempere.  Forming quality  aluminium  plate/sheet is designated  by  4100-0,  while deep  drawing  quality by 30030. Aluminium & its alloys  have  an equally   good  machinability  and   welding/Brazing   &soldering quality. That is why aluminium sheets are used in all fabrication industries to produces innumerable items.

Service Details:

Aluminium containing variable amounts of manganese, silicon, copper, Magnesium, lead bismuth, nickel, chromium, zinc ortin.  A wide range of uses and properties is possible.  Always  may  be obtained  for  costing  or working  heat  treatable  or  non-heat treatable  with  a wide range of  strength  corrosion  resistance machinability and weldability.

The Latin in name  Alumen was  employed  by  pliny.   The chemical Alum had been used for car tarius but it was not until 1922 that French Hoffman concluded from experiments that the book of  alum was a true and distinct Earth.  Before the end of that century the name of the earth had been anglicized to Alumina.

Service Details:

Aluminium composite panel is a composite of a Polyethylene core between two Aluminium sheet and coated with extra durable PVDF (Fluoro Carbon Polymer) which features characteristics such as fire resistance and weather resistance. It also dampers vibration so no additional sound is necessary. Aluminium composite panels have revolutionized the designing of modern building. Providing  flexibility in design, the metal composite panels  offer a choice of dramatic surface finishes and weather resistance that are proven in the international market.

Service Details:

Windows and doors connect the interior of a house to the outdoors, provide ventilation and daylight, and are important aesthetic elements. Windows and doors are often the architectural focal point of residential designs, yet they provide the lowest insulating value in the building envelope. Although the efficiency of windows has improved markedly, they still represent one of the major energy liabilities in new construction

Aluminum is now widely use as the first choice for the construction of Aluminum Doors & Windows, Ventilators and Front Wall Glazing at all major construction sites such as Hotels, Offices, Complexes, Auditoriums, Hospitals, Show rooms etc. Aluminum Ladders are widely use for domestic as well as in industrial purposes and is also used for various outdoor services  such as  street  light,  multistoried buildings,  industrial sheds,  loco sheds  and auditoriums  maintenance

Aluminum fabricated items like doors, windows etc. have become that standard accepted feature in most modern buildings, The use of aluminum in business and office complexes , buildings, theatres ,auditorium is very extensive for functional as well as decorative purposes. Similarly in residential buildings also aluminum doors, windows, railings, grill works etc. are used extensively. Textile shops and other trading shops in lighter materials too are going in for shelves made of aluminum for tacking purposes.

Service Details:

All Aluminium Alloy Conductors (AAAC): These are made out of high strength Aluminium-Magnesium-Silicon alloy.  As compared to conventional ACSR, AAAC are of lighter weight, comparable strength & current carrying capacity, lower     electrical losses and superior corrosion resistance, This has given AAAC a wide acceptance in the distribution and transmission lines.. This conductor has a minimum conductivity of 52.5% IACS.

The conductor made from aluminium alloys are suitable in urban areas as they provide better tensile strength and conductivity. These alloys are known with different names in various countries. Some f these alloys are costly as they are heat treated. One of the alloys of aluminium is known as silmalec which contains 0.5% od silicon, 0.5 % of magnesium and rest of aluminium. Due to this there is improvement in conductivity and mechanical strength.